Skyjack SJIII 4620 Operating Manual page 47

Section 3 - Operation
3.8-5 To Drive Forward or Backward
Be aware of blind spots when operating
the aerial platform.
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Activate platform control console (refer to
Section 3.8-3).
2. Select lift/off/drive switch to "
3. Activate and hold "
4. Move controller handle "
" " backward/down to desired speed and
direction of aerial platform travel.
5. Return controller to neutral center position to stop.
Release " " enable trigger switch.
To protect against unintended movement
of the aerial platform, push in the
emergency stop button after you have
arrived at your desired location or
elevation.
SJIII DC Electric
WARNING
WARNING
" drive position.
" enable trigger switch.
" forward/up or
WARNING
3.8-6 To Steer
1. Activate platform control console (refer to
Section 3.8-3).
2. Select lift/off/drive switch to "
3. Activate and hold "
4. Press " " rocker switch on top of controller
handle in either direction to steer.
Steering is not proportional. Driving and
steering may be active at the same time.
Start Operation
" drive position.
" enable trigger switch.
NOTE
Page 47