Skyjack SJIII 4620 Operating Manual page 103

Section 5
Top View (Continued)
No. Label Pictorial
5
SJIII DC Electric
Labels and Nameplates - Models 3220, 3226 & 46xx
How to engage maintenance support for inspection or
maintenance.
Refer to Operating manual.
1. Raise platform until there is adequate clearance to swing
down maintenance support.
2. Swing maintenance support down from storage bracket
into a vertical position. Lower platform until the bottom end of
maintenance support rests on the lower cross bar.
3. Maintenance support is now secured.
4. Turn main power disconnect switch to on position.
5. Raise platform until there is adequate clearance to swing up
maintenance support.
6. Swing maintenance support up and place into storage
bracket.
7. Ensure platform is fully lowered.
Description
(A) Turn main power disconnect switch to off position.
(B) Perform inspection/maintenance.
Labels
5
Page 103