Skyjack SJIII 4620 Operating Manual page 28

Function Tests
Platform Control Console
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level Drive
Switch
2.4-3 Platform Control Console
1. Ensure base "
pulled out.
2. Select off/platform/base key switch to "
platform position.
3. Ensure main power disconnect switch is in
" " on position.
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
4. Use the ladder of aerial platform to access
platform.
5. Close the gate.
6. On platform control console, pull out "
emergency stop button.
• Test Platform Emergency Stop
1. Push in " " emergency stop button and
attempt to activate any platform function.
Page 28
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Lift/Off/Drive Switch
" emergency stop button is
WARNING
contained in this operating manual and on the aerial platform.
Rocker Switch
Controller
Horn Pushbutton
Result: All selected platform functions
should not operate.
• Test Enable Trigger Switch
1. Pull out "
"
2. Without activating "
attempt to activate any platform function.
Result: All platform functions should not
operate.
• Test Steering
1. Select lift/off/drive switch to "
position.
2. Activate and hold "
3. Press rocker switch on top of controller handle
to " " left and "
Result: Steer wheels should turn left and right.
"
Section 2 - Familiarization
Emergency Stop Button/
Operation Light
" emergency stop button.
" enable trigger switch,
" drive
" enable trigger switch.
" right.
SJIII DC Electric