Skyjack SJIII 4620 Operating Manual page 29

Section 2 - Familiarization
Platform Control Console
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level Drive
Switch
• Test Driving
1. Ensure path of intended motion is clear.
2. Activate and hold "
3. Slowly move controller handle in "
direction until aerial platform begins to move,
and then return handle to center position.
Result: Aerial platform should move in
forward direction, and then come to a stop.
4. Slowly move controller handle in "
direction until aerial platform begins to move,
and then return handle to center position.
Result: Aerial platform should move in reverse
direction, and then come to a stop.
• Test Brakes
Brakes will engage instantly when you
release the controller handle, causing
aerial platform to stop immediately.
SJIII DC Electric
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Lift/Off/Drive Switch
"enable trigger switch.
" forward
" reverse
WARNING
contained in this operating manual and on the aerial platform.
Rocker Switch
Controller
Emergency Stop Button/
Operation Light
Horn Pushbutton
1. Ensure path of intended motion is clear.
2. Activate and hold " " enable trigger switch.
3. Drive aerial platform "
" " backward. Test brake by releasing
controller handle.
Result: Aerial platform should come to a
stop. If aerial platform pulls to one side while
stopping, do not operate aerial platform until
brake adjustments have been checked.
4. Drive aerial platform "
" " backward. Test brake again by releasing
" " enable trigger switch only.
Result: Aerial platform should come to an
instant and abrupt stop. If aerial platform does
not stop immediately, or if aerial platform pulls
to one side while stopping, do not operate
aerial platform until brake adjustments have
been checked.
Function Tests
" forward and then
" forward and then
Page 29