Skyjack SJIII 4620 Operating Manual page 31

Section 2 - Familiarization
Platform Control Console
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level Drive
Switch
5. Repeat the steps above with block placed
under battery tray.
Result: Aerial platform should not move
forward or backward.
• Test Elevated Drive Speed
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 7 feet (2 meters) is reached and
attempt to drive forward or reverse.
Result: Aerial platform should move
slower than when it was in stowed
position.
SJIII DC Electric
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Lift/Off/Drive Switch
WARNING
contained in this operating manual and on the aerial platform.
Rocker Switch
Controller
Emergency Stop Button/
Operation Light
Horn Pushbutton
Function Tests
Page 31