Skyjack SJ6826 RT Operation Manual
  1. Manuals
  2. Brands
  3. Skyjack Manuals
  4. Scissor Lifts
  5. SJ6826 RT
  6. Operation manual

Skyjack SJ6826 RT Operation Manual

Rough terrain scissors
Hide thumbs Also See for SJ6826 RT:
Table of Contents

Advertisement

Quick Links

OPERATION
MANUAL
SJ6826 RT, SJ6832 RT
ROUGH TERRAIN SCISSORS
221587ABA
October 2019
ANSI/CSA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SJ6826 RT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Skyjack SJ6826 RT

Summary of Contents for Skyjack SJ6826 RT

  • Page 1 OPERATION MANUAL SJ6826 RT, SJ6832 RT ROUGH TERRAIN SCISSORS 221587ABA October 2019 ANSI/CSA...
  • Page 2 This manual is for MEWPs with serial numbers: SJ6826 RT, SJ6832 RT: A200 000 001 & Above Please refer to the website (www.skyjack.com) for contact information, other Serial Numbers, the most recent Technical Manuals, and USB software. Original instructions in English.
  • Page 3 It may also be used to alert against unsafe practices. Blue Safety information. IMPORTANT IMPORTANT indicates a procedure essential for safe operation and which, if not followed, may result in a malfunction or damage to the MEWP . SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 4 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 5: Table Of Contents

    Freewheeling valve ............. 27 SJ6826 RT, SJ6832 RT...
  • Page 6 4.3-14 Do a test of the horn ............48 SJ6826 RT, SJ6832 RT...
  • Page 7 Install the propane cylinder ............75 SJ6826 RT, SJ6832 RT...
  • Page 8 Section 9 – Unique Skyjack Features ........

  • Page 9: Section 1 - About This Mobile Elevating Work Platform (Mewp)

    3000 hours, whichever occurs first. Any defective 1.1-2 Purpose of equipment part will be replaced or repaired by your local Skyjack The Skyjack Rough Terrain Scissor lifts are designed dealer at no charge for parts or labor. In addition, to move personnel, tools, and materials to working all products have a 5 year structural warranty.

  • Page 10: Scope Of This Manual

    SJ Rough Terrain Scissor Lift series. For a list of applicable models, refer to section 7.1. Equipment identified with ANSI meets the ▪ ANSI SAIA-A92.20-2018 standard. Equipment identified with CSA meets the CSA ▪ B354.6:2017 standard. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 11: Primary Assemblies

    An emergency-lowering system. ▪ An AC power outlet. ▪ A liquid propane gas (LPG) tank (optional ▪ equipment). A ladder at the rear of the base. ▪ Two front and two rear outriggers (optional ▪ equipment). SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 12: Serial Number Nameplate

    Capacity and maximum number of persons ▪ Voltage ▪ Maximum drive height ▪ Maximum platform height ▪ Maximum wind speed ▪ Maximum manual force ▪ Model year ▪ MEWP weight ▪ System pressure ▪ Maximum incline. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 13: Maintenance Responsibility

    IMPORTANT Only use original or manufacturer-approved parts and components for the MEWP . NOTE Refer to the Skyjack web site (www.skyjack.com) for machine registration and the latest service bulletins before you do frequent/periodic or annual inspections. 1.4-3 Owner The owner is responsible for maintenance inspections and repairs.
  • Page 14 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 15: Section 2 - General Safety Precautions

    ▪ Keep a minimum safe distance It was modified without permission from ▪ from sources of high-voltage Skyjack and the MEWP owner. power. If you do not obey, there is a risk of death or serious injury. 2.1 Electrocution hazards...

  • Page 16: Safety Instructions

    MAKE SURE the ground condition assessment DO NOT allow the considers the subsurface voids such as cellars, entanglement of ropes, cables basements, culverts, and pipes. or hoses with the MEWP , adjacent structures or objects. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 17 DO NOT use the MEWP as a crane. DO NOT use the MEWP when the wheels or tires are damaged (refer to section 4.2-5). Make sure the wheel nuts are tight. DO NOT sit, stand, or climb on the guardrails. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 18 DO NOT place materials on the guardrails entry gate(s) in place. or materials that exceed the confines of the guardrails unless approved by Skyjack. Remove all personnel from the platform before you try to free a snagged platform with the base DO NOT use the MEWP under controls.

  • Page 19: Fall-Protection

    If personal fall-protection equipment (PFPE) is potentially flammable gases, explosive gases or required, by an employer or the authority having particles) are appropriate for the MEWP specifications jurisdiction, Skyjack recommends the use of a full (refer to section 7.5). body harness with a lanyard. PFPE must be attached...
  • Page 20 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 21: Section 3 - Familiarization

    8) on the MEWP . Do these tasks before the operation: 1. Worksite inspection. Refer to section 2.4. 2. Daily visual and maintenance inspections. Refer section 4.2. 3. Function tests. Refer to section 4.3. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 22: Overview Of The Mewp

    Section 3 – Familiarization Overview of the MEWP 3.1 Overview of the MEWP Platform control console Manual Outrigger/generator storage box control console Base control (optional equipment) console Emergency- lowering/ brake release/ freewheeling valves Main power disconnect switch SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 23: Manual Storage Box

    The switch must be in the on position to operate the MEWP . The switch must be in the off position when you transport the MEWP or put it in storage. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 24: Base Control Console

    (LPG) or gasoline as the fuel type. Glow plug indicator (diesel): This light comes on when the glow plug switch is held. It stays on until the glow plug heating cycle is complete. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 25: Platform Control Console

    Emergency-stop/operation light: This button disconnects power to the control circuit. When the light is on continuously, the platform ▪ controls are available. When the light flashes, there is an overload ▪ (refer to section 3.4-8) SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 26: Features And Devices

    SJ6826 RT < Full height 2.13 m (7 ft) < SJ6832 RT 2.13 m (7 ft) Full height Brake hand pump Brake auto-reset valve plunger Figure 01 Lowered and elevated travel position SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 27: Freewheeling Valve

    With the emergency-lowering system, you can lower release the freewheeling valve. the platform if there is a failure of the primary power. Refer to section 6.1 for the emergency-lowering procedure. Freewheeling valve Holding-valve manual override knob Emergency-lowering access rod Emergency-lowering valve SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 28: Fall-Protection Anchorage

    2.3). If you use it incorrectly, with the base controls until you remove all death, serious injury, and/or MEWP damage can personnel from the platform. If you do not obey, occur. there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 29: Maintenance Support

    Turn the valve counterclockwise to open the fuel supply. 3.4-11 Auto-level system (optional equipment) The auto-level system deploys and retracts all four outriggers at the same time. Use this system to level the MEWP from the platform. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 30: Extension Platform

    Refer to section 5.8 on how to extend CAUTION and retract the extension platform. Skyjack approved modifications and attachments can change the MEWP specifications. Refer to the applicable instructions and labels. IMPORTANT Refer to the labels of the optional equipment the actual weight.

  • Page 31: Elevate™ Telematics - Access Control Unit

    The green light on the keypad of the access ▪ control unit. Smart ID cards for MEWPs that have the access control function. Skyjack does not supply or reset The main power disconnect switch. ▪ PIN codes or Smart ID cards. Speak to the MEWP The emergency-stop button on the base control ▪...

  • Page 32: Outrigger/Generator Control Console

    The main power disconnect switch switches. ▪ The emergency-stop button on the base control ▪ Generator switch: This switch turns the console generator on or off. The idle/platform/base key switch. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 33: Hydraulic Generator

    The hydraulic generator supplies power to the AC power socket on the platform of the MEWP . It is controlled by the generator switch on the outrigger control console. Refer to section 5.10 on how to operate the hydraulic generator. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 34 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 35: Section 4 - Inspections Before Operation

    If the MEWP is damaged or has been modified from the initial factory-delivered condition, without permission from Skyjack, lock and tag the MEWP . Remove the MEWP from service. If you do not obey, there is a risk of death or serious injury.

  • Page 36: Visual And Daily Maintenance Inspections

    Make sure that the MEWP is on a firm, level The ground area below the MEWP ▪ surface before you do the visual and daily Outriggers (optional equipment). ▪ maintenance inspections. If you do not obey, there is a risk of machine damage. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 37: Base

    WARNING ▪ The tie rod end studs are attached and tight. ▪ Do not use tires other than the tires that Skyjack There is no visible damage. specifies for this MEWP . Do not mix different types ▪ of tires or use tires that are not in good condition.

  • Page 38: Engine Compartment

    Burn hazard. Do not touch hot engine components without the correct PPE. Let the engine cool before you do an inspection or servicing. If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 39 Make sure that the muffler and exhaust ▪ leakage. systems are correctly attached with no visible damage. Engine and pivot tray Make sure there are no loose or missing parts. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 40: Hydraulic Compartment

    Make sure that there are no loose or missing ▪ on the gauge. parts. Make sure there is no visible damage or ▪ hydraulic leaks. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 41: Platform Assembly

    3. Use the MEWP ladder to exit the platform. Make sure that the gate is in good condition ▪ and operates correctly. Fall-protection anchorages Make sure that the fall-protection anchorages ▪ are correctly installed. Make sure there is no visible damage. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 42: Lift Mechanism

    Make sure all the pins and fasteners are ▪ correctly installed. Make sure that the cables and wires have the ▪ correct routing, and show no signs of wear and/or physical damage. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 43: Function Tests

    5. Start the engine at the base. emergency-stop button comes on. This shows 6. Turn the main power disconnect switch to the that the system is in operation, and there are off position. no faults. Result: The engine stops. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 44: Do A Test Of The Idle/Platform/Base Key Switch

    6. Move and hold the lower/neutral/raise switch Result: The platform lowers. ▪ in the raise position. 6. Press and turn the manual override knob of the Result: The platform raises. ▪ holding valve clockwise until it stops to restore normal operation. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 45: Do A Test Of The Positive Air Shutoff (Optional Equipment)

    3. Open the engine compartment cover. 4. Lift the switch guard for the positive air shutoff on the base control console. 5. Move the positive air shut-off switch to the on position to engage the shutoff valve SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 46: Do A Test Of The Platform Emergency-Stop

    2. Squeeze and hold the function-enable switch Result: The engine stops. ▪ 3. Press the steering rocker switch on top of the controller handle to steer left and right. Result: The steer wheels turn left and right. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 47: 10 Do A Test Of The Drive Function

    7 seconds. 4. Slowly push the controller handle to move the MEWP in the forward direction. Result: The MEWP does not move in the ▪ forward direction. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 48: 13 Do A Test Of The Platform Raise And Lower Functions

    5. Pull the controller handle to fully lower the platform. Result: The platform fully lowers. ▪ 4.3-14 Do a test of the horn 1. Press the horn button Result: The horn makes a sound. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 49: 16 Do A Test Of The Sgle Switch (Optional Equipment)

    4. Push and hold the SGLE button only. Do not squeeze the function-enable switch . Push and pull the controller handle to raise or lower the platform. Result: The platform does not raise or lower. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 50: 17 Do A Test Of The Outrigger Interlocks (Optional Equipment)

    8. Move and hold the auto level switch in the retract position to fully retract all four outriggers. Result: All four outriggers fully retract. ▪ 9. Move and hold the auto-level enable switch in the enable position. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 51: 18 Do A Test Of The Auto-Level (Optional Equipment)

    3. Move the lift/off/drive switch to the lift Result: All four outriggers fully retract. ▪ position. 4. Move and hold the auto-level enable switch in the enable position. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 52: 19 Do A Test Of The Generator (Optional Equipment)

    The generator starts. The light goes on. 4. Move the generator switch to the off position. Result: The generator stops. The light goes ▪ off. The throttle goes back to idle. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 53: Operator's Checklist

    Each item shall be inspected using the appropriate section PASS NOT APPLICABLE of the Skyjack operating manual. As each item is inspected, Add a comment if the item does not pass inspection. check or complete the appropriate box. Comment (if item does not pass inspection)
  • Page 54 Do a test of the auto-level (optional equipment) Do a test of the generator (optional equipment) 1905AA NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 55: Section 5 - Operation

    It was modified without permission from ▪ button for 15 to 20 a. Push the Skyjack and the MEWP owner. seconds, until the Diesel engine start If you do not obey, there is a risk of death or light turns off.

  • Page 56: Raise Or Lower The Platform With The Base Control Console

    If you do not obey, there is a risk of death or serious injury. 4. Use the MEWP ladder to enter the platform. 5. Close the gate. 6. Pull the emergency-stop button on the platform control console. 7. Start the engine. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 57: Drive Forward Or Rearward

    4. Push the steering rocker switch on top of the controller handle in one of the two directions to steer. NOTE The steer function is not proportional. Drive and steer functions can be active at the same time. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 58: Extend/Retract The Extension Platform

    Flashing quickly there is an outrigger or auto- level function error. The outriggers are extended and the MEWP is level. The light is on while the auto-level function is active only. Figure 04 Auto-level outrigger condition SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 59: Start And Stop The Generator (Optional Equipment)

    You start the drive, lift, or auto-level functions ▪ You push the emergency-stop button ▪ You change the idle/platform/base key switch ▪ position The engine stalls. ▪ The generator stays on while you lower the platform. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 60: Mewp Shutdown

    5. Turn the idle/platform/base key switch to the idle position on the base control console and remove the key. 6. Push the emergency-stop button. 7. Turn the main power disconnect switch to the off position. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 61: Section 6 - Additional Procedures

    7. Find the emergency-lowering valve the hydraulic compartment, pull and hold the emergency-lowering valve to lower the platform. 8. Press and turn the override knobs of each holding valve clockwise until it stops to restore normal operation. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 62: Release The Brakes Manually

    The Tip-over hazard. Disengage the brakes manually brake is released. before you push, winch, or tow the MEWP . If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 63: Move The Mewp For Transport

    Remove all personnel, tools, and materials from ▪ the platform. Lift the MEWP with the forklift forks in the forklift ▪ lift locations . Refer to Figure 055. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 64: Hoist The Mewp

    Remove all personnel, tools, and materials from ▪ the platform. Attach the rigging to all four lift points . Refer ▪ Figure Figure 06 Appropriate method to hoist SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 65: Drive And Tie-Down The Mewp

    Refer to Figure 08. Vertically, the center of gravity is approximately a small distance above the chassis. ������ ������� � �������� 124631AC Figure 08 MEWP Center of Gravity SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 66: Use The Platform Control Console From The Ground

    MEWP ladder to enter risk of death or serious injury. or exit the platform. If you do not obey, there is a risk of death or serious injury. 2. Use the MEWP ladder to enter the platform. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 67 6. Use as low a speed as practical to drive the MEWP forward to the necessary location. 7. Push the emergency-stop button when the MEWP is at the necessary location. 8. Turn the main power disconnect switch to the off position. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 68: Fold The Guardrails

    The guardrail system must be in the vertical position. Lock all pins correctly. An incorrectly locked guardrail can cause a fall, which can result in death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 69 Fall hazard. To prevent a fall, keep away from the sides of the platform when you fold or unfold the 15. Fold down the left-side extension guardrail. guardrails. If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 70: Unfold The Guardrail System Up

    12. Put in all locking pins to lock the right side guardrail in position. 13. Unfold the left-side extension guardrail. 14. Put in the locking pin to lock the left-side extension guardrail in position. 15. Unfold the right-side extension guardrail and the front guardrail. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 71: Move The Mewp Through A Doorway

    If you do not obey, there is a risk of death or serious injury. 6. Connect the platform control console cable to the electrical plug in the engine compartment of the MEWP . Refer to section 6.5. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 72 21. Return the guardrails to the vertical position if folded. Refer to section 6.6 for the procedure on how to fold the guardrails. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 73: Use The Maintenance Support

    WARNING Crush hazard. Do not put parts of your body through the scissor assembly unless the maintenance support is correctly deployed. If you do not obey, there is a risk of death or serious injury. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 74: Refuel

    2. Push all the emergency-stop buttons, and turn tag the MEWP for servicing or repair. If you do not the main power disconnect switch to the off obey, there is a risk of death or serious injury. position. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 75: Remove The Propane Cylinder

    6. Open the valve one quarter-turn counterclockwise. Do an inspection for gas leaks. 7. If there are no gas leaks, fully open the propane cylinder valve. 8. Wipe off the soapy water after the inspection is complete. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 76 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 77: Section 7 - Technical Specifications

    Refuel Section 6 – Technical Specifications Section 7 – Technical Specifications SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 78: Standard And Optional Equipment

    Heavy duty pipe rack Non marking grip lug foam-filled tires 3.5 kW hydraulic generator Cold Weather start package Bio oil Work lights Positive air shutoff Tool caddy Outriggers Diesel scrubber Elevate Telematics Secondary Guarding Lift Enable (SGLE) 1967AA SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 79: Owner's Annual Inspection Record

    13 months. If you do not obey, there is a risk of death or serious injury. IMPORTANT The Owner’s Annual Inspection Record on the scissor assembly must be filled out after an annual inspection is completed. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 80: Specifications

    Emission sound pressure level at platform does not exceed 70 dB(A). Vibration - acceleration to which operator’s body is subjected does not exceed 0.5 m/sec 1704AA * Weights are approximate; refer to serial nameplate for specific weight. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 81: Maximum Platform Capacities (Evenly Distributed)

    96 dB Power Level (ISO 4871) Whole-body Vibration on Plat- ≤ 0.5 m/s form Operating Temperatures Standard -20°C (-4°F) to +40°C (+104°F) Cold Weather Package Below -10°C (+14°F) Arctic Weather Package Below -18°C (0°F) 1904AA SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 82: Floor Loading Pressure

    WARNING Do not use tires other than the tires that Skyjack specifies for this MEWP . Do not mix different types of tires or use tires that are not in good condition.

  • Page 83: Section 8 - Labels

    Section 8 – Labels DANGER. Orange WARNING. Yellow CAUTION. Green Emergency- lowering procedure. Blue Safety information. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 84: Engine Compartment

    Select to enable platform controls, to allow engine run with no ▪ controls active or to enable base control console. Read the operating manual. ▪ Positive air shutoff (optional equipment) Select the positive air shut-off switch (optional) to stop the air supply to the engine. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 85 Turn the switch counterclockwise to turn the power off. Use a padlock to lock the switch in position. �� 90 lb-in 10.2 N-m Battery fuse assembly Assemble fuse as shown. Torque to value indicated. ���������� SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 86: Right Side

    Read and understand the outlined risks associated with this MEWP prior to operation. Indicates location of operating manual. Skyjack logo Model number* Product Identifier *Model number will vary and may not be as shown. Caution tape stripe SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 87 Keep clear. Stay away from MEWP when in operation. Annual inspection Ensure that MEWP has received annual inspection prior to operation. Model number* Product Identifier *Model number will vary, may not be as shown. Tip-over hazard Wheel specifications SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 88 Elevate™– Powered by Trackunit (optional equipment) This MEWP is equipped with additional functionality. 221111 QR code This code gives you fast access to the MEWP documentation, and the live MEWP data supplied by ELEVATE telematics (optional equipment). SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 89: Front Side

    Caution tape stripe Serial plate Product identification and specifications BAR CODE �� Maintenance support Deploy maintenance support here. ���������� Skyjack manufactured date Manufactured Shows the month and year of manufacture for this MEWP . /YYYY SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 90 5. Turn Main power disconnect switch to on position. 6. Raise platform until there is adequate clearance to retract the maintenance support. 7. Retract the maintenance support up and place into storage bracket. 8. Fully lower the platform. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 91: Left Side

    8.4 Left side Description Label Pictorial Skyjack logo Model number* Product Identifier *Model number will vary, may not be as shown. Caution tape stripe Keep clear Keep clear. Stay away from MEWP when in operation. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 92 Section 8 – Labels Left side Left side (continued) Description Label Pictorial Model number* Product Identifier *Model number will vary, may not be as shown. Connect AC supply Connect AC Supply here. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 93 6. Push, winch, or tow the MEWP to the necessary location. 7. Use wheel chocks or blocks at the front of the wheels and behind them to prevent MEWP movement. 8. Pull out the plunger of the brake auto-reset valve to re- engage the brakes. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 94 3. To lower the platform, pull out emergency-lowering valve located on the outside of the hydraulic tray. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 95: Hydraulic/Fuel Compartment

    Low sulfur fuel or ultra low sulfur fuel only. Diesel (optional equipment) Use diesel fuel only. Diesel, EN 590, DIN 51 628 Unleaded fuel Use unleaded gasoline only. No smoking Do not smoke near this location. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 96: Rear Side

    Perform visual inspection and function tests at the beginning of each shift. Refer to Section 4: Maintenance and Inspection Schedule. No jewelry Caution–Do not wear jewelry. Warning–Do not alter Do not alter or disable limit switches or other safety devices. SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 97 Rear side (continued) Isometric view Description Label Pictorial Lift and tie-down points Only use these points for lifting or tying down. Warning–California Proposition 65 WARNING Cancer and Reproductive Harm– Cancer and Reproductive Harm- https://www.p65warnings.ca.gov/. https://www.p65warnings.ca.gov/. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 98: Propane Tank

    Propane tank 8.7 Propane tank       PROPANE   Description Label Pictorial �� ��� Liquid propane � Use liquid propane only. � � �������� �� Propane PROPANE Use liquid propane only. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 99: Platform View

    8.8 Platform view Description Label Pictorial Platform capacity Platform capacity label for SJ6826 RT and SJ6832 RT respectively. Rated work load in each configuration is as shown. Rated ( lb) work load includes the weight of both personnel and material.
  • Page 100 Connect AC supply here. Fall protection anchorage Attach body harness lanyards of each occupant to fall protection anchorage points. Rated for one (1) person per anchorage. Railing pins (vertical) WARNING! Falling Hazard. Ensure hinged railing is pinned. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 101: Platform Control Console

    Select and hold to start engine. Select and hold to operate choke (dual fuel) or glow plugs (diesel). Push to sound horn. Push to stop engine and disable controls (emergency-stop). Light indicates controls enabled. Read the operating manual. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 102: Lift Cylinders

    3. To lower the platform, pull out emergency-lowering valve located on the outside of the hydraulic tray. SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 103: Outriggers (Optional Equipment)

    Do not alter or disable limit switches or other safety devices. �� Outrigger load (optional equipment) Indicates rated outrigger load. � � � � �� � � � � � � �� � � ���������� SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 104: Outrigger And Generator Control Console (Optional Equipment)

    Solid: The outriggers are extended and the platform is level. ▪ Automatic outrigger control console Select to retract all outriggers or to extend all outriggers with ▪ automatic leveling. Select to enable manual or automatic outrigger controls. ▪ SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 105: Air Supply Options (Optional Equipment)

    Air supply options (optional equipment) Section 8 – Labels 8.13 Air supply options (optional equipment) Description Label Pictorial Connect air supply �� ������� ������� Connect platform air supply here. ���������� SJ6826 RT, SJ6832 RT 221587ABA...
  • Page 106 Notes SJ6826 RT, SJ6832 RT 221587ABA...

  • Page 107: Section 9 - Unique Skyjack Features

    Having equipment with features and functionality that allow you and your customers to do more is a vital part of the utilization equation. Skyjack offers a range of accessory products to expand a MEWP’s functionality and your power to offer a truly flexible rental choice.
  • Page 109 WARNING Cancer and Reproductive Harm- https://www.p65warnings.ca.gov/.
  • Page 110 www.skyjack.com...

This manual is also suitable for:

Sj6832 rt

Table of Contents

Save PDF