Backup Power And Energy Saving Mode - Fronius Primo GEN24 4.0 Operating Instructions Manual

Backup power Under the following conditions, the battery and the inverter are switched to en-
and energy sav-
ergy saving mode after a waiting time of 8 - 12 minutes and backup power mode
ing mode is ended:
-
-
If the battery and inverter are in energy saving mode, the system is reactivated
by the following:
-
-
-
46
The battery is discharged to the minimum state of charge and no energy is
coming from the PV modules.
The inverter is set to energy saving mode (standby mode).
Enough energy is available from the PV modules.
The public grid is functioning again.
The battery is switched off and on.