Fronius Primo GEN24 4.0 Operating Instructions Manual page 4

Connection area
Connection area divider
Ground electrode terminal
DC disconnector
Data communication area
Button functions and LED status indicator
Internal schematic connection diagram of the IOs
Backup power variant - PV Point (OP)
General
Explanatory note - PV Point/PV Point Comfort
PV Point (OP)
PV Point Comfort
Backup power variant - Full Backup
General
Prerequisites for backup power mode
Transitioning from feeding energy into the grid to backup power mode
Transitioning from backup power mode to feeding energy into the grid
Backup power and energy saving mode
Automatic switch to backup power including backup power circuits and 1-pin separation, e.g.
Austria or Australia
Functions
Transitioning from feeding energy into the grid to backup power mode
Transitioning from backup power mode to feeding energy into the grid
Automatic switch to backup power all-pin separation, e.g. Germany, France, UK, Spain
Functions
Transitioning from feeding energy into the grid to backup power mode
Transitioning from backup power mode to feeding energy into the grid
Automatic switch to backup power all-pin separation, Italy
Functions
Transitioning from feeding energy into the grid to backup power mode
Transitioning from backup power mode to feeding energy into the grid
Manual switch to backup power 1-pin separation, e.g. Australia / 2-pin separation, e.g. Ger-
many
Functions
Transitioning from feeding energy into the grid to backup power mode
Transitioning from backup power mode to feeding energy into the grid
Installation
General
Quick-lock system
Warning notices on the device
System component compatibility
Installation location and position
Choosing the location of the inverter
Choosing the location of third-party batteries
Installation position of inverter
Install the mounting bracket and hang up the inverter
Selecting the fixing material
Properties of the mounting bracket
Do not deform the mounting bracket
Fitting the mounting bracket to a wall
Installing the mounting bracket on a mast or beam
Attaching the mounting bracket to mounting rails
Attaching the inverter to the mounting bracket
Prerequisites for connecting the inverter
Different cable types
Permissible cables for the electrical connection
Permissible cables for the data communication connection
Cable diameter of the AC cable
4
32
33
33
34
34
35
37
39
41
41
41
42
43
45
45
45
45
46
47
47
47
47
48
48
48
49
50
50
50
51
52
52
52
53
55
57
57
57
59
60
60
61
62
64
64
64
64
64
65
66
66
67
67
67
68
69