Table of Contents
Advertisement
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
For further information, please see the product-specific user guides for
Mitel OpenCount on our website (www.mitel.com) or contact your system
administrator.
Activating/deactivating PIN call:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
MobileLink
This section explains how to set the MobileLink feature.
Your phone supports MobileLink, a feature that provides seamless mobile
integration using Bluetooth wireless technology.
Using the MobileLink feature, you can:
• Sync your mobile phone's contact list and call history with the
Mitel 6930 SIP phone.
• Answer a mobile phone call using your SIP phone.
• Move mobile call audio between the SIP phone and your mobile phone.
Note:
• Additional Bluetooth devices connected to your mobile phone such as
smartwatches and headsets might impede or alter the behavior of the
MobileLink feature. It is recommended that you disconnect any addi-
tional Bluetooth devices from your mobile phone when using the
MobileLink feature on your SIP phone.
To configure the MobileLink key, you must log in to the Self Service Portal.
For more information about the MiVoice Office 400 Self Service Portal, see
the section "MiVoice Office 400 Self Service Portal", page 9. You can con-
figure Mobile keys only on the top softkeys.
MobileLink key
Following is the procedure to configure MobileLink key:
1. Log on to the Self Service Portal using your phone number and PIN.
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
PIN call
/
PIN call
rebook.
Phoning
79
Advertisement
Table of Contents
