Table of Contents
Advertisement
Phoning
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Notes:
• You can activate only one callback at a time.
• An unanswered callback will be automatically cancelled by the system
after about 30 minutes.
Activating callback:
You called someone and hear the busy tone or the ring-back tone. Press the
function key for Callback.
➔
Depending on the communication system, you hear the acknowledgement
tone.
Put the handset on-hook.
➔
The display shows
Clear callback:
Press the function key for Callback.
➔
Callback request is deleted.
To answer the callback request
Someone has asked you to call back. The display shows Callback.
You cannot automatically answer a callback request on your phone. You
can either enter the call number manually or use a CTI client, for example
the Mitel OfficeSuite.
Answering the callback request:
Enter a phone number in call preparation.
Pick up the handset or press the
Note:
You cannot delete a callback request.
44
Call
expected. The LED on the function key lights up.
Dial
softkey.
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
Advertisement
Table of Contents
