Table of Contents
Advertisement
Ring tones
•
Silent
Tone set
Setting the ring:
Press the Option key.
Scroll to Audio.
Scroll down to
tion key.
Select the setting you want and confirm with the
➔
After you selected a ring melody, the melody will be played.
Note:
• A list of alarm melodies is available for playback:
dies
• You can configure individual ring tones for each busy lamp field and line
key using the Self Service Portal. For more information about the Self
Service Portal, please refer to "MiVoice Office 400 Self Service Portal",
page 9.
Setting the audio properties
Using your phone, you can make and answer calls using the handset,
headset or handsfree system. You can set custom ring melodies for your
phone. The audio settings allow the use of different combinations of these
three operation modes in order to achieve maximum flexibility in phone
operation. The following options are available for selection:
Audio settings
Audio
•
Speaker
(default)
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
Description
If you do not want to be disturbed during a certain time,
you can set your phone not to ring with Suppress ring
tone.
Country-specific ring tone settings. This menu is set by
your system administrator.
Ring Tones
> Test.
Description
Mode:
Setting possibilities for headset mode:
The connection is established via the handset or the
hands-free system.
• Press the loudspeaker/headset key when in handset
mode to switch to hands-free mode.
• Pick up the handset when in hands-free mode to
switch to handset mode.
using the navigation key and confirm with the selec-
Personalizing your phone
Save
softkey.
Menu
>
Alarm melo-
89
Advertisement
Table of Contents
