Auto-Answer/Play Warning Tone; Adjusting The Ring And Listening Volume; Muting A Call; Mobilelink - Mitel MiVoice 6930 User Manual

Mitel 6930 IP Phone User Guide for MiCloud Connect

Auto-Answer/Play Warning Tone

The auto-answer feature on the IP phone allows you to enable or disable automatic answering for
an Intercom call.
If Auto-Answer is enabled, the phone automatically answers an incoming intercom call. If Play
Warning Tone is also enabled, the phone plays a tone to alert you before answering the intercom
call.
Note: Your Mitel administrator can set a time period delay before the phone automatically answers.
Contact your Mitel administrator for more information.

Adjusting The Ring And Listening Volume

To adjust the volume on your phone, use
speakerphone, and headset are independent of each other, and you can set them as follows:
• Adjust the volume of your phone's ringer while the phone is on hook.
• Adjust the handset listening volume while the handset is off hook.
• Adjust the speakerphone volume when the LED next to
• Adjust the headset listening volume when the LED next to
Note: When using a wireless headset, if you experience audio problems, ensure that your wireless
headset is configured according to the manufacturer's instructions. Problems that might result
from improper configuration include the following:
• You cannot hear a dial tone.
• The volume for you or the other party is not loud enough.
• You hear a buzzing or hissing sound.

Muting A Call

• To mute a call so that the caller does not hear you, press
The LED next to the hardkey blinks in red when the mute is active.
• To unmute a call so that the caller can hear you, press
The LED next to the hardkey does not blink when the mute is not active.

MobileLink

The 6930 IP Phone supports MobileLink, a feature that provides seamless mobile integration using
Bluetooth wireless technology. MobileLink highlights include the ability to:
• Sync your mobile phone's contact list and call history with your 6930 IP phone.
• Answer a mobile phone call using your 6930 IP phone.
14
. The volume settings for the ringer, handset,
illuminated.
blinking.
.
again.