Table of Contents
Advertisement
Syncing mobile contacts
When you pair and connect a mobile phone for the first time, your phone
automatically attempts to sync your mobile contacts to the Directory appli-
cation. You can also manually synchronize or update your mobile contacts.
To manually synchronize or update your mobile contacts:
Ensure that you have paired your mobile phone with your Mitel 6930 SIP phone.
See "Pairing a mobile phone using Bluetooth", page 80.
Press the contacts key on the phone.
Press the
Press the
➔
Your phone attempts to re-synchronize and update your mobile contacts.
Note:
• You might need to acknowledge the request on your mobile phone.
• If the update fails, a message notifying the failure to retrieve contacts is
displayed on screen. Press Retry to attempt to update again, or Cancel
to cancel the attempt.
• Some mobile phones sync only the contacts that are stored on the
phone's flash memory. Contacts stored on the phone's SIM card might
not sync with the Mitel SIP phone.
• Mobile contacts are cleared from the Directory application when the
phone's firmware is upgraded. If your mobile device is configured to
allow for automatic re-synchronization, your phone synchronizes the
contacts again the next time your mobile device connects to your SIP
phone. If your mobile phone is not configured for automatic re-synchro-
nization, you must manually synchronize your mobile contacts.
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
Mobile Contacts
folder.
Reload
softkey.
Phoning
81
Advertisement
Table of Contents
