Table of Contents
Advertisement
Hide number
You do not want your call number to appear on the terminal display of a
called party in the public network. The following options are available here:
Menu
Permanent
Per call
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Notes:
• Your call number can only be hidden if you select an external call num-
ber.
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
You phone number is hidden in all outgoing calls.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
➔
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
Description
The call number is never displayed.
Call number should only be restricted for certain calls.
This function must be activated before dialling the call
number.
Call number is dialled and your own number is not displayed to the called
party.
Hide
number.
Hide
number.
Select
softkey.
Phoning
45
Advertisement
Table of Contents
