Table of Contents
Advertisement
Phoning
This function must be saved to a function key over the Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Activating/deactivating discreet ring:
Press the function key for
➔
The function is activated/deactivated, the LED on the function key lights
up/does not light up respectively.
Activating do not disturb
You do not want to receive any calls for the time being.
With the do not disturb function, you can stop calls being made to you if
you are busy in a call or are not otherwise able to take any calls. Your
phone does not ring and is set to busy for incoming calls. Your incoming
calls are automatically forwarded to a call forwarding destination that has
been configured by your system administrator.
Your system administrator must enable this function in the MiVoice
Office 400 communication system.
This function must be saved to a function key over the Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Menu
Do not disturb (busy)
on/off
Do not disturb (for-
warding) on/off
Activating/deactivating do not disturb:
Press the function key for
ing)
➔
The function is activated/deactivated,
the LED on the function key lights up/does not light up. Your callers hear the
busy tone.
54
Description
Your phone does not ring and is set to busy for incoming
calls.
Your phone does not ring and is set to busy for incoming
calls. Incoming calls are automatically forwarded to a
destination that has been configured by your system
administrator.
on/off.
Discreet ring
on/off.
Do not disturb (busy) on/off
is displayed on the status bar and
or
Do not disturb (forward-
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
Advertisement
Table of Contents
