Table of Contents
Advertisement
• You cannot block an emergency announcement.
• An emergency announcement may only be executed using function
codes. You will find a list of all function codes in the user's guide "Fea-
tures Overview Mitel 415/430/470" on the
Announcement to a group:
• The announcement will only be received by phones which both have
authorisation to receive announcements and are not in use.
• If receipt of announcements is not authorised on any of the phones in
the announcement group or all the phones are in use, you will hear the
busy tone.
• Group announcements are always conducted with a one-sided connec-
tion.
• The group number must be entered as two digits.
Start announcement to a user:
1. Press the function key for
2. Depending on settings, enter the number and press the
➔
The user is alerted to the announcement by two short tones on the loud-
speaker. The one-sided connection is made, you can talk.
Start announcement to a group:
1. Press the function key for
2. Depending on the settings, enter the two digit group number.
➔
The user group is alerted to the announcement by two short tones on the
loudspeaker. The one-sided connection is made, you can talk.
Receiving an announcement
You will be alerted to the announcement with two short signal tones and
spoken to directly via the loudspeaker over a one-way connection. The
display shows
In order to be able to receive an announcement, your phone must be nei-
ther in use nor block announcements (configuration see chapter "Activat-
ing protection against call types", page 96).
Receiving the emergency announcement:
Mitel 6930 SIP
eud-1764/1.0 – R5.0 HF1 – 08.2017
<Announcement to a
<Announcement to a
Announcement
from.
Mitel
DocFinder.
user>.
EnterSelect
group>.
Phoning
softkey.
51
Advertisement
Table of Contents
