Table of Contents
Advertisement
Phoning
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold,
flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key or the
➔
The call is active again.
Parking conversation partner
You would like to keep the person you are talking to on hold without block-
ing a phone line.
You may park the person you are talking to and then pick up the call again
on the same phone on which you parked the person.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Parking the active call party:
Press the function key for
➔
The call party is parked. The LED of the function key is red.
Notes:
The display returns to idle. The person you talked to will remain parked until they
put down the handset.
Recommence conversation with the parked call party:
1. Press the function key for Park.
➔
2. Pick up the handset.
➔
Enquiry call during a call
You want to call someone else briefly without losing your current call part-
ner. Then you want to resume your conversation with your original call
partner.
46
Hand-free mode is activated.
You are connected via the handset.
is displayed and the LED of the line key
Park
and put down the handset.
Pick up
softkey.
eud-1764/1.0 – R5.0 HF1 – 08.2017
Mitel 6930 SIP
Advertisement
Table of Contents
