Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
A
D
Figure 1. Main components.
A. Rear Roller: Controls bend radius.
B. Upper
Roller:
workpiece against lower roller.
C. Crank Handle: Turns lower roller, feeding
workpiece through machine.
D. Lower Roller: Feeds workpiece through
machine.
-4-
manual
BEFORE
B
C
Secures
and
presses
E
H
G
Figure 2. Adjustment components.
E. Upper Roller Release Lever: Releases
upper roller from frame for workpiece removal.
F.
Radius Adjustment Knob (1 of 2): Adjusts
rear roller up and down for different sized
radius bends.
G. Thickness Adjustment Knob (1 of 2):
Adjusts lower roller up and down for different
workpiece thicknesses.
H. Release Lever Lock Knob: Secures upper
roller release lever.
Model T32718 (Mfd. Since 07/21)
F
Advertisement
Table of Contents
