Black Horse Model Antonov An-2 Instruction Manual Book
  1. Manuals
  2. Brands
  3. Black Horse Model Manuals
  4. Toy
  5. Antonov An-2
  6. Instruction manual book
Black Horse Model Antonov An-2 Instruction Manual Book

Black Horse Model Antonov An-2 Instruction Manual Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Antonov An - 2
Glow and EP
ONLY INCLUDING OLEO STRUTS.
ALL BALSA - PLY WOOD CONSTRUCTION
COVERED IN A HEAT – SHRINK FILM WITH PRINTED.
95% ALMOST READY TO FLY
SPECIFICATION:
- Wingspan: 2,425 mm (95.47 in).
- Length: 1,710 mm (67.32 in).
- Weight: 9.6kg (21.12 lbs).
- Wing area: 130.12 dm2.
- Wing loading: 73.78 g/dm2.
- Wing type: Naca Airfoil.
- Servo mount: 42mm x 21mm
37mm x 16mm elevator
- Gear type: : Oleo struts,
for tail gear (included).
Instruction Manual Book
Item code: BH186
Parts listing required (not included):
- Radio: 06 channels minimum.
- Servo: 10 standard hight torque servos
(size 39.9 x 20.12 x 37.1)mm
+ 2 standard hight torque servos
(size 35 x 15)mm elevator
- Engine: 30 – 35cc gas
- Motor: Brushless outrunner 2500 - 3200W, 250KV.
- Propeller: Suit with your engine.
Recommended Motor and Battery set up
(not included):
- Motor: RIMFIRE.1.60.
- Lipo cell: 12 cells 4000 – 5500 mAh.
- Receiver battery: 6V/ 1200 – 2000 mAh.
- ESC: 80 - 100A.
Made in Vietnam.

Advertisement

Table of Contents
loading

Related Manuals for Black Horse Model Antonov An-2

Summary of Contents for Black Horse Model Antonov An-2

  • Page 1 Instruction Manual Book Item code: BH186 Antonov An - 2 Glow and EP ONLY INCLUDING OLEO STRUTS. ALL BALSA - PLY WOOD CONSTRUCTION COVERED IN A HEAT – SHRINK FILM WITH PRINTED. 95% ALMOST READY TO FLY SPECIFICATION: Parts listing required (not included): - Wingspan: 2,425 mm (95.47 in).

  • Page 2: Table Of Contents

    Thank you for purchasing Black Horse Model products. With over 18 years experience in production and fly testing, Black Horse Model is committed to bring the best quality products and good service to customers. Along with a team of creative engineers and skilled workers, we will always accompany with customers by our great experiences, fully enthusiasm...

  • Page 3: Warranty

    In that Black Horse Model has no control over the final assembly or material used for final assembly, SUGGESTION Black Horse Model is not responsible for loss of use , or other incidental or consequential damages. To avoid scratching your new airplane, do not...

  • Page 4: Covering Tools

    Antonov An - 2 Item code: BH186 Instruction Manual FLIGHT WARNINGS ADHESIVES AND REQUIRED TOOLS When ready to fly, first extend the transmitter aerial. Thin CA Switch on the transmitter. 30-minute epoxy Switch on the receiver. 6-minute epoxy Check that the wings are correctly fitted to the Threadlocker thread locking cement fuselage.
  • Page 5 Antonov An - 2 Item code: BH186 Instruction Manual • Officially designated AMA Air Show Teams (AST) are authorized to use devices and practices as defined within the Team AMA Program Document. (AMA Document #718.) (j) Not operate a turbine-powered aircraft, unless in compliance with the AMA turbine regulations. (AMA Document #510-A.) 3.

  • Page 6: Parts Listing (Not Included)

    Antonov An - 2 Item code: BH186 Instruction Manual PARTS LISTING (NOT INCLUDED). Servo extension leads. 4 ....pcs. 920mm ..2 pcs. Engine: 33 - 35 cc gas 430mm ..8 pcs. 220mm ..4pcs. Propeller. Suit with your engine. LiPo.
  • Page 7 Antonov An - 2 Item code: BH186 Instruction Manual : Fuselage. : Wing panel ( 2a, 2b, 2c, 2d ). : Cockpit fuselage ( 3a: Pilot doll, 3b: Cockpit, 3c: Panel, 3d : Right window, 3d Left window, 3e: Canopy, 3g: Centre Stick, 3f: Wind Screen) : Horizontal stabilizer( 4a,4b ).
  • Page 8 Antonov An - 2 Item code: BH186 Instruction Manual 3x15mm Button Head Cab link Cap Screw Fuel Tank - - - - - - - 2 - - - - - - - 4 M3 Metal Clevis 3mm Flat Washer - - - - - - - 2 - - - 1 - - - - - - - 4...

  • Page 9: Installing The Ailerons And Flaps Servos Of High Wing

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE AILERONS AND FLAPS SERVOS OF HIGH WING Place the servo into the servo tray/ hatch into the servo box on the bottom of the wing and drill 1.5mm pilot holes through the tray and servo box for each of the four mounting screws.
  • Page 10 Antonov An - 2 Item code: BH186 Instruction Manual Flaps Flaps servos. 2 mm approx.16mm For Flap. For Flap. 3mm Lock Nut 3x12mm Button Head Cap Screw Flap Flap 1.5mm Screw 100mm 2x10mm Tp Screw Flap ng> 1.5mm Cut off shaded portion Drill holes using the stated.
  • Page 11 Antonov An - 2 Item code: BH186 Instruction Manual Aileron Aileron servos. 2 mm approx.16mm Aileron Aileron 3mm Lock Nut 3x12mm Button Head Cap Screw Aileron Aileron 1.5mm Screw 100mm 2x10mm Tp Screw Aileron 1.5mm Cut off shaded portion Drill holes using the stated. carefully.
  • Page 12 Antonov An - 2 Item code: BH186 Instruction Manual Ball link 3mm Lock Nut 2x10mm Tp Screw 2.6x80mm Push rod - - - - 8 - - - - 8 - - - - 2 - - - - 16 Horn 3x12mm Button Head 2.6x85mm Push rod...
  • Page 13 Antonov An - 2 Item code: BH186 Instruction Manual For Aileron. For Aileron. For Flap. For Flap. Horn Ball Link For Aileron. For Aileron. For Flap. For Flap. Lock nut 3x12mm Cap Screw...

  • Page 14: Installing The Ailerons And Flaps Servos Of Low Wing

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE AILERONS AND FLAPS SERVOS OF LOW WING Place the servo into the servo tray/ hatch into the servo box on the bottom of the wing and drill 1.5mm pilot holes through the tray and servo box for each of the four mounting screws.
  • Page 15 Antonov An - 2 Item code: BH186 Instruction Manual Flaps Flaps servos. 2 mm approx.16mm For Flap. For Flap. 3mm Lock Nut 3x12mm Button Head Cap Screw Flap Flap 1.5mm Screw 100mm 2x10mm Tp Screw Flap g> 1.5mm Cut off shaded portion Drill holes using the stated.
  • Page 16 Antonov An - 2 Item code: BH186 Instruction Manual Aileron Aileron servos. 2 mm approx.16mm Aileron Aileron 3mm Lock Nut 3x12mm Button Head Cap Screw Aileron Aileron 1.5mm Screw 100mm 2x10mm Tp Screw Aileron 1.5mm Cut off shaded portion Drill holes using the stated. carefully.
  • Page 17 Antonov An - 2 Item code: BH186 Instruction Manual Ball link 3mm Lock Nut 2x10mm Tp Screw 2.6x80mm Push rod - - - - 8 - - - - 8 - - - - 2 - - - - 16 Horn 3x12mm Button Head 2.6x85mm Push rod...
  • Page 18 Antonov An - 2 Item code: BH186 Instruction Manual For Aileron. For Aileron. For Flap. For Flap. Horn Ball Link For Aileron. For Aileron. For Flap. For Flap. Lock nut 3x12mm Cap Screw...

  • Page 19: Installing The Low Wing Light

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE LOW WING PLASTIC LIGHT <Left Wing> <Right Wing> Plastic Light Plastic Light - - - - - - - - 2 - - - - - - - - 1 Plastic Light cover Plastic Light cover - - - - - - - - 1...

  • Page 20: Installing The Main Gear

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE MAIN GEAR 4mm Flat Washer 4x15mm Button Head Cap Screw - - - - - - - - - - - - - 4 - - - - - - - - - - 6 4x20mm Socket Head Cap Screw 4mm Spring Washer - - - - - - - - - - 4...
  • Page 21 Antonov An - 2 Item code: BH186 Instruction Manual Main Gear BOTTOM VIEW BOTTOM VIEW 4x20mm Socket Head Cap Screw...
  • Page 22 Antonov An - 2 Item code: BH186 Instruction Manual BOTTOM VIEW BOTTOM VIEW 4x15mm Button Head Cap Screw Aluminium Fuselage Strut Attachment 4mm Flat Washer 4mm Spring Washer Cut off shaded portion carefully.
  • Page 23 Antonov An - 2 Item code: BH186 Instruction Manual BOTTOM VIEW BOTTOM VIEW...
  • Page 24 Antonov An - 2 Item code: BH186 Instruction Manual 4mm Lock Nut 4mm Lock Nut BOTTOM VIEW 4x15mm Button Head Cap Screw 4x12mm Button Head Cap Screw BOTTOM VIEW Apply threadlocker (screw cement).
  • Page 25 Antonov An - 2 Item code: BH186 Instruction Manual BOTTOM VIEW 5X16mm Flat Washer 5x55mm Socket Head Cap Screw BOTTOM VIEW Apply threadlocker (screw cement).

  • Page 26: Installing The Fuselage Servos

    Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW INSTALLING THE FUSELAGE SERVOS 1) Install the rubber grommets and brass collets into the elevator, rudder and throottle servor. Test fit the servos into the servo tray. Trim the tray if necessary to fit your servos. 2) Mount the servo to the tray using the mounting screws provided with your radio system.
  • Page 27 Antonov An - 2 Item code: BH186 Instruction Manual Top view Throttle servo Rudder servo WING ATTACHMENT Locate the aluminium wing dihedral brace. *** Test fit the aluminium tube dihedral brace into each 19mm Aluminium tube. wing haft. The brace should slide in easily. If not, use 220 grit sand around the edges and ends of the brace until it fits properly.
  • Page 28 Antonov An - 2 Item code: BH186 Instruction Manual Top view Aluminium tube ø19mm Top view...
  • Page 29 Antonov An - 2 Item code: BH186 Instruction Manual 3x20mm Socket Head Cap Screw Top view 6X50mm 3x15mm Aluminium Socket Head Cap Screw High Wing Low wing Top view Cap screw 2.5mm Hex wrench for main wing fixture Plastic Assemble left and right Apply epoxy glue.
  • Page 30 Antonov An - 2 Item code: BH186 Instruction Manual Top view Wing Struts 4x30mm Button Head Cap Screw Top view Drill holes using the stated. Assemble left and right sides the same way. (in this case 5mm .5mm...

  • Page 31: Horizontal Stabilizer Installation

    Antonov An - 2 Item code: BH186 Instruction Manual HORIZONTAL STABILIZER INSTALLATION Pinned Hinge - - - - 6 Make certain the hinges are adequately secured with glue. If they come loose in flight accidents may result. ELEVATOR CONTROL HORN AND ELEVATOR PUSHROD INSTALLATION Ball link 3x12mm Button Head - - - - 4...
  • Page 32 Antonov An - 2 Item code: BH186 Instruction Manual Horn Assemble left and right Cut off shaded portion Apply epoxy glue. sides the same way. carefully. Must be purchased separately!

  • Page 33: Horizontal Stabilizer Installation

    Antonov An - 2 Item code: BH186 Instruction Manual Ball Link Lock Nut 2.6x40mm Push Rod Aluminium Ball Flat Washer 3x12mm Button Head Cap Screw HORIZONTAL STABILIZER INSTALLATION 12mm Aluminium tube. 355mm TOP VIEW TOP VIEW Aluminium tube ø12 mm Assemble left and right sides the same way.
  • Page 34 Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW TOP VIEW BOTTOM VIEW 4x15mm Button Head Cap Screw - - - - - - - - - - - - - 2 4mm Aluminium Washer - - - - - - - - - - - - - 2 4mm Aluminium Washer 4x15mm Button Head Cap Screw...

  • Page 35: Horizontal Stabilizer Struts

    Antonov An - 2 Item code: BH186 Instruction Manual HORIZONTAL STABILIZER STRUTS Pinned Hinge - - - - 6 - - - - - - - - - - - 2 Wing Struts BOTTOM VIEW Pinned Hinge open BOTTOM VIEW Drill holes using the stated.

  • Page 36: Installing Vertical Stabilizer

    Antonov An - 2 Item code: BH186 Instruction Manual Ball link INSTALLING VERTICAL STABILIZER 3x12mm Cap Screw - - - - 2 - - - - 2 Rudder are installed the same way as the aileron 2.6x1.100mm Pushrod before. 3mm Lock Nut - - - 1 Control horn, linkages for rudder are installed the - - - - - - - - - 2...
  • Page 37 Antonov An - 2 Item code: BH186 Instruction Manual Horn TOP VIEW 3x12mm Button Head Cap Screw Horn TOP VIEW 3mm Lock Nut...

  • Page 38: Installing The Tail Gear

    Antonov An - 2 Item code: BH186 Instruction Manual Button Head 3x12mm Cap Screw Servo arm 3mm Flat washer Ball link Push rod Rudder Pushrod 3mm Lock Nut TOP VIEW Servo Rudder Rudder Pushrod Rudder INSTALLING THE TAIL GEAR Cable Threaded Caupler 3x15mm Button Head Cap Screw 1200mm Cable - - - - - - - 2...
  • Page 39 Antonov An - 2 Item code: BH186 Instruction Manual Crimp Cable rod Crimp BOTTOM VIEW 3mm Spring Washer 3x15mm Button Head Cap Screw...
  • Page 40 Antonov An - 2 Item code: BH186 Instruction Manual BOTTOM VIEW BOTTOM VIEW...
  • Page 41 Antonov An - 2 Item code: BH186 Instruction Manual BOTTOM VIEW Close / Open Metal Clevis Cab link Hex Nut Cut off shaded portion Must be purchased Cut off excess. carefully. separately!
  • Page 42 Antonov An - 2 Item code: BH186 Instruction Manual Servo tail gear TOP VIEW Cable Servo Gear Tail Gear Servo Gear Cable Pay close attention here.

  • Page 43: Installing The Engine

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE ENGINE May be you also need to trim some wood from the tri-angle wood for the installation is easy. Using plate of plywood (supplied with the kit) mark the holes onto the fire wall for installing the engine mount for DLE-35CC or OS-33CC.
  • Page 44 Antonov An - 2 Item code: BH186 Instruction Manual 16x5mm Flat Washer 5mm Flat Washer 5mm Flat Washer 12x60mm Aluminium - - - - - - - 14 - - - - - - - 4 - - - - - - - 4 - - - - - - - 4 5x90mm Socket Head 5mm Spring Washer...
  • Page 45 Antonov An - 2 Item code: BH186 Instruction Manual GAS POWER Pushrod Gas Choke Rod Must be purchased separately!

  • Page 46: Asseembly Fuel Tank Guide

    Antonov An - 2 Item code: BH186 Instruction Manual...
  • Page 47 Antonov An - 2 Item code: BH186 Instruction Manual...

  • Page 48: Installing The Fuel Tank

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE FUEL TANK 5. When satisfied with the alignment of the stopper assembly tighten the 3mm x 20mm machine screw until the rubber stopper expands and 1. Using a modeling knife, cut one length of silicon seals the tank opening.
  • Page 49 Antonov An - 2 Item code: BH186 Instruction Manual Must be purchased separately!

  • Page 50: Installing The Throttle

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE THROTTLE 1) Install one adjustable metal connector through the Connector third hole out from the center of one servo arm, enlarge the hole in the servo arm using a 2mm drill bit - - - - - - - - - - - - 1 to accommodate the servo connector.

  • Page 51: Mounting The Cowling

    Antonov An - 2 Item code: BH186 Instruction Manual Throttle servo MOUNTING THE COWLING 3x12mm Button Head Cap Screw 3x12mm Tp Screw - - - - - - 4 - - - 8 3mm Flat Washer Plastic - - - - - - 4 - - - - - - 4 220 mm 184 mm...
  • Page 52 Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW 3x12mm Tp Screw plastic...
  • Page 53 Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW 3x12mm C . A Button Head Cap Screw TOP VIEW C . A 3x12mm Button Head Cap Screw Drill holes using the stated. Apply instant glue (in this case 2.5mm (C.A glue, super glue).
  • Page 54 Antonov An - 2 Item code: BH186 Instruction Manual Plastic parts top fuselage - - - - - - - - - - - - - - - - 1 Apply epoxy glue.
  • Page 55 Antonov An - 2 Item code: BH186 Instruction Manual Plastic parts bottom fuselage - - - - - - - - - - - - - - - - 1 3x15mm Tp Screw - - - - - - - - - - - - - - - - 2 3x15mm Tp Screw BOTTOM VIEW BOTTOM VIEW...

  • Page 56: Installing The Switch, Receiver And Battery

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE SWITCH, RECEIVER AND BATTERY Plug the servo leads and the switch lead into Wrap the receiver and battery pack in the the receiver. You may want to plug an aileron protective foam to protect them from vibration.

  • Page 57: Installing The Electric Motor (Ep Version)

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE ELECTRIC MOTOR (EP VERSION) 4x20mm Button Head 5mm Lock Nut 4mm Spring Washer - - - 1 Cap Screw - - - - - - - - 4 - - - - - - - 5 - - - - - - - 4 5x25mm Button Head M4 Blind Nut...
  • Page 58 Antonov An - 2 Item code: BH186 Instruction Manual 6x25mm Plastic Screw...

  • Page 59: Installing The Cockpit

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE COCKPIT panel Pilot doll Cockpit Centre stick TOP VIEW Pilot doll TOP VIEW Chairs Panel Centre stick Cockpit...
  • Page 60 Antonov An - 2 Item code: BH186 Instruction Manual Close / Open TOP VIEW TOP VIEW...

  • Page 61: Installing Canopy Fuselage

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING CANOPY FUSELAGE Position the canopy so the rear frame on the Canopy canopy is aligned with the rear edge of the cockpit opening. Use canopy glue to secure the canopy to Wind Screen the canopy hatch.
  • Page 62 Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW Assemble left and right Apply epoxy glue. sides the same way.
  • Page 63 Antonov An - 2 Item code: BH186 Instruction Manual Canopy TOP VIEW TOP VIEW Apply epoxy glue.

  • Page 64: Installing The Propeller And Spinner

    Antonov An - 2 Item code: BH186 Instruction Manual INSTALLING THE PROPELLER AND SPINNER 3x6 mm Button Head Cap Screw - - - 4 TOP VIEW 44mm - - - 1 Must be purchased separately!
  • Page 65 Antonov An - 2 Item code: BH186 Instruction Manual TOP VIEW Spinner 3x6mm Button Head Cap Screw TOP VIEW...

  • Page 66: Balacing

    Antonov An - 2 Item code: BH186 Instruction Manual Lift the model. If the tail drops when you BALANCING. lift, the model is “tail heavy” and you must add weigh* to the nose. If the nose drops, it  1) It is critical that your airplane be bal- is “nose heavy”...

  • Page 67: Control Throws

    Antonov An - 2 Item code: BH186 Instruction Manual CONTROL THROWS. PRE-FLIGHT CHECK.  1) We highly recommend setting up a  1) Completely charge your transmitter and plane using the control throws listed. receiver batteries before your rst day of y- ing.

  • Page 68: For Your Radio Installation Basic Connection For Airplane And Adjustment Of Servos

    Antonov An - 2 Item code: BH186 Instruction Manual FOR YOUR RADIO INSTALLATION BASIC CONNECTION FOR AIRPLANE AND ADJUSTMENT OF SERVOS For more information, refer to radio system instruction manual. Example of connection Follow instruction manual of Engine and Battery. Aileron Servo Aileron Aileron Servo...

  • Page 69: Main Gear Dimensional Detail

    Antonov An - 2 Item code: BH18H6 Instruction Manual MAIN GEAR DIMENSIONAL DETAIL 127mm 155mm 475mm TAIL GEAR DIMENSIONAL DETAIL 23mm 31mm 18mm...

  • Page 70: Decoration

    Antonov An - 2 Item code: BH18H6 Instruction Manual DECORATION...

  • Page 71: Exploded View

    Antonov An - 2 Item code: BH18H6 Instruction Manual...
  • Page 72 I/C FLYING WARNINGS Always operate in open areas, away from fly near power lines,aerials or AL WAYS adjust the engine from behind NEVER factories, hospitals, schools, buildings other dangerous areas including airports, the propeller, and do not allow any part of and houses etc.
  • Page 73 I/C FLYING GUIDELINES Operate the control sticks on the ALWAYS land the model INTO When ready to fly, first extend transmitter and check that the the wind, this ensures that the the transmitter aerial. control surfaces move freely and in model lands at the slowest possible the CORRECT directions.

This manual is also suitable for:

Bh186

Table of Contents