Advertisement
Manual overview
9
Differentiating between versions of your Matrox Breakout Box
The Matrox Breakout Box module was modified in March 2011 so that it is only
compatible with 24 V input signals. You can identify this new version of the
Matrox Breakout Box module by the phrase 24V Inputs on a sticker at the back
of your Matrox Breakout Box. The product label for the 24 V Matrox
Breakout Box is shown below:
If the sticker does not list 24V Inputs, you have a Matrox Breakout Box module
that accepts 5 V input signals. For information pertaining to the 5 V input version
of the Matrox Breakout Box module, refer to the manual associated with that
version. This manual assumes you have a Matrox Breakout Box module that works
only with 24 V input signals.
Manual overview
This manual provides connection and technical information for your
Matrox Breakout Box.
For information on connecting your Matrox Breakout Box to a third-party device,
refer to Chapter 2: Connecting Matrox Breakout Box.
For a summary of the key features of your Matrox Breakout Box, and pinout
descriptions for its connectors, refer to Appendix B: Technical Reference.
If you experience problems during installation or while using this product, refer
Need help?
to the support page of the Matrox Imaging website:
http://www.matrox.com/imaging/support. This page provides answers to
frequently asked questions, as well as offers registered customers additional ways
of obtaining support.
Advertisement
