Routing Input Signals To Your Matrox Camera - Matrox Breakout Box Installation And Technical Reference

16 Chapter 2: Connecting Matrox Breakout Box

Routing input signals to your Matrox camera

There are two ways to route input signals to your Matrox camera:
• Through the direct input connector of your Matrox Breakout Box.
• Through the Opto 22-isolated input connectors of your Matrox Breakout Box.
Note that to connect a trigger signal to your Matrox camera, you must use the
direct input connector.
Matrox
Breakout Box
Equivalent
circuit only
Third-party device
(input- generating )
Direct input
connector
Opto 22-isolated
input connectors
Third-party device
(input-generating)