Matrox Breakout Box Installation And Technical Reference page 24

24 Chapter 2: Connecting Matrox Breakout Box
Connecting to an
NPN-compatible
PLC device
- To connect to an NPN-compatible PLC device, connect the ground of the
third-party device and the GND wire-terminal of your Matrox Breakout Box
module to a common ground. Note that the NPN-compatible PLC device
requires its own power source.
NPN compatible
PLC device
Matrox
Breakout Box
Direct output
connector
input-sensing
NPN input
+24 V
(Active low)
J2
Output
open collector
GND
0-500 mA