Table of Contents
Advertisement
For extended control options, the GE1000 supports a connection to a MOOER F4 wireless footswitch
(to be purchased separately).
Please consult the manual for the F4 footswitch for battery specs and charging requirements.
The GE1000 can only be connected to one wireless footswitch at a time.
Before using the footswitch for the first time (or after a factory reset), please follow the steps below
to pair the footswitch with the GE1000:
•
Switch the F4 footswitch on, press and hold footswitches A and C to enter pairing mode (LED
blinking).
•
Open the settings screen on the GE1000 and scroll down to the "F4 WIRELESS FOOTSWITCH"
option.
•
Activate "Wireless footswitch" and click "Start Pairing".
•
When the pairing is successful, the GE1000 shows "Paired" and the display on the F4
footswitch shows "On".
•
Once paired, the wireless footswitch will automatically connect to the GE1000 each time
both devices are turned on and within range of each other.
Wireless footswitch functions:
After pairing is completed, the wireless footswitch can be used to switch the four CTRL functions
assigned to the current preset (see CTRL ). The GE1000 does not have to be in CTRL mode for this.
This means that, depending on the functions you have assigned for this preset in CTRL mode, you can
use the wireless footswitch at any time to individually activate/deactivate up to four effect modules
in the chain of the currently selected preset or to control the tap tempo.
The LED on the wireless footswitch will indicate the ON/OFF status of the switchable modules or
blink to indicate the current tempo.
MOOER STUDIO provides computer software for MOOER Intelligent Series products, which can be
used for firmware updates, data management (preset upload / download, GNR/GIR/IR import,
backup/restore, phrase recording audio import/export, etc.) and editing functions.
Software download
Visit the download area of the MOOER AUDIO website (www.mooeraudio.com), find the "GE1000"
download page, download the appropriate installation program for your operating system (Windows
or Mac) and install it.
System Requirements:
•
Windows-Win10 or above
•
Mac OS-10.11 or above
F4 WIRELESS FOOTSWITCH
FIRMWARE UPDATE
51
Advertisement
Table of Contents
