Page 1
Guia Rápido Guia de inicio rápido Guide de Démarrage Rapide This guide is designed to get you set up and playing through your GE200 as fast as possible. For the complete manual, please visit the official MOOER website at www.mooeraudio.com.
Patches selection Connect the included power supply to the GE200. The GE200 will then boot into the main interface. PLAY/CHAIN mode: switch the preset tone by , or rotate the VALUE knob, press to pin and hold for 1 second to achieve fast switching.
Expression pedal setting The GE200 has a built-in pedal (EXP) and an external pedal interface (EXP2). The EXP2 requires a 6.35' stereo cable to connect to the external expression pedal. EXP1 and EXP2 both can be manipulated in the EXP menu.
LOOPER GE200 has an integrated 52 second looper, complete with special effects. Press the and CTRL/TAP footswitches simultaneously to access the looper screen LOOPER P025 MOOER GE200 PRESET 00.0S REC: 100 PLAY: 100 REVERSE: OFF HALF SPEED: OFF You can use the VALUE control to adjust the following parameters...
TUNER Press footswitches simultaneously to enter/exit the guitar tuner in GE200 TUNER A= 435HZ MUTE 1. MUTE/BYPASS the audio signal 2. Tuner calibration 3. Nearest Note 4. Displays red when the note is flat or sharp Displays green when the note has achieved the correct pitch...
RHYTHM Ge200 has a built in RHYTHM module with 40 drum machines and 10 Metronome styles for you to use when practicing. Press the RHYTHM button to toggle this module on/off and enter it’s edit screen. RHYTHM RHYTHM 8BEAT3 NO.03 1.
POST: The LOOPER will be placed at the end of the effects chain in order to record the wet signal as the output from the GE200. In POST mode, the looper works as a traditional one does. Once the track is recorded, it...
Page 15
SHENZHEN MOOER AUDIO CO. LTD 6F, Unit D, Jinghang Building, Liuxian 3rd Road, Bao’an 71 District, Shenzhen, China. 518133 MADE IN CHINA 2030502013...