Related Manuals for PureTools PT-IP-HD26X
Summary of Contents for PureTools PT-IP-HD26X
- Page 1 User Manual PT-IP-HD26X User Manual H.264/265 Encoder/Decoder 1200p (60Hz 4:4:4) with Video wall PT- IP-HD26X Model Designed in Germany V1.0 © 2022 PureLink GmbH All rights reserved.
- Page 2 User Manual PT-IP-HD26X Preface Read this user manual carefully before using this product. Pictures shown in this manual are for reference only. Different model layouts and specifications are subject to the physical product. This manual is for operation instructions only, not for any maintenance usage.
- Page 3 PT-IP-HD26X REACH | 1907/2006/EU ROHS | 2011/65/EU PureLink hereby declares that this product PureTools PT-IP-HD26X complies with Directives 1907/2006/EU und 2011/65/EU. EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive) PureLink GmbH hereby declares that this product PureTools PT- IP-HD26X complies with Directives 2014/30/EU and 2014/35/EU.
- Page 4 User Manual PT-IP-HD26X SAFETY PRECAUTIONS To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material ...
-
Page 5: Table Of Contents
User Manual PT-IP-HD26X Content 1. Product Introduction......................1.1 Introduction........................1.2 Features..........................1.3 Package List........................2. Panel Description......................... 2.1 Encoder Panel......................... 2.2 Decoder Panel........................ 3. Specification.......................... 4. System Diagram........................5. Switch Model......................... 6. 1080P over IP System Control..................7. Rack Mounting Instruction.................... -
Page 6: Product Introduction
User Manual PT-IP-HD26X 1.Product Introduction 1.1 Introduction The AV over IP product distributes multiple HD sources to multiple HD display devices over a 100M/1G Network Switch. It offers configurable high quality, low-bandwidth H.265/H.264 configurable compression video and supports resolution up to 1920x1200@60Hz 4:4:4. -
Page 7: Package List
User Manual PT-IP-HD26X 1.3 Package List • • 1 x 1GbE Encoder 1 x 1GbE Decoder • • 2 x 3-pin Phoenix Connectors 2 x 3-pin Phoenix Connectors (3.81mm, male) (3.81mm, male) • • 4 x Machine Screws (4mm M3) 4 x Machine Screws (4mm M3) •... - Page 8 User Manual PT-IP-HD26X Name Description POWER LED The LED flashes at 1 Hz during the system startup, and the (Red) LED is always on after the startup is complete. Network connection status LED. ▪ Light on: Network is connected, and there is compatible signal (with a resolution of less than 1920*1200, and the frame rate is less than or equal to 60) .
- Page 9 User Manual PT-IP-HD26X Name Description Data Signal ▪ Flashing: There is data transmission. Indicator ▪ Dark: There is no data transmission. (Yellow) HDMI input port, connect to an HDMI signal source device HDMI IN such as DVD or Set-top box with an HDMI cable.
- Page 10 User Manual PT-IP-HD26X 5, For EDID ID settings, press the UP or DOWN button until the LED screen shows “E00” (in which “E” refers to EDID, “00” to EDID ID). Press and hold UP + DOWN buttons for 5 seconds, then release to enter the “EDID Settings” mode. The EDID ID number (e.g.
-
Page 11: Decoder Panel
User Manual PT-IP-HD26X 2.2 Decoder Panel D EC POWER LINK CH SELECT RESET DC 12V HDMI OUT AUDIO OUT RS-232 Name Description The LED flashes at 1 Hz during the system startup, and the POWER LED LED is always on after the startup is complete. - Page 12 User Manual PT-IP-HD26X Analog stereo audio output port. Connect to an amplifier or loudspeaker through a 3-pin phoenix connector. It follows AUDIO OUT the audio output of the Encoder. 100M/1G Network port. Connect to a Switch/Router/Hub for LAN (POE) data transmission or POE function.
- Page 13 User Manual PT-IP-HD26X The corresponding output resolution ID is as follows: Resolution ID Resolution Description Pass Through (default) 1080P60 1080P50 1080P30 1080P25 1080P24 720P60 720P50 576P50 480P60 640X480P60 800X600P60 1024X768P60 1280X800P60 1280X1024P60 1366X768P60 1440X900P60 1600X1200P60 1680X1050P60 1920X1200P60...
-
Page 14: Specification
User Manual PT-IP-HD26X 3. Specification Technical HDMI Compliance HDMI 1.3 HDCP Compliance HDCP 1.4 Video Bandwidth 4.95Gbps Video Compression H.265/H.264 Standard 100m (CAT5E/6/6A/7) Transmission Distance Video Resolution Up to 1920x1200@60Hz 4:4:4 Color Space RGB4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 Input: 8-bit, 10-bit, 12-bit (1080p@60Hz);... -
Page 15: System Diagram
User Manual PT-IP-HD26X 4. System Diagram Usage Precaution • Make sure all components and accessories included before installation. • System should be installed in a clean environment with proper temperature and humidity. • All of the power switches, plugs, sockets, and power cords should be insulated and safe. -
Page 16: Switch Model
S5720S-28X-PWR-LI-AC NETGEAR S3300 6. IP System Control This product can be controlled by Controller Box or third-party controller. For details of IP system control, and to understand the more advanced features of the PT-IP-HD26X series, please refer PT-IP-CNTRL10 product information. -
Page 17: Rack Mounting Instruction
User Manual PT-IP-HD26X 7. Rack Mounting Instruction 7.1 4U Rack Mounting This product can be mounted in a standard 4U rack (Please contact your supplier for 4U rack sale). The mounting steps are as follows: Step 1: Use included screws to fix two mounting ears on the product, as shown in the figure below:... -
Page 18: Rack Mounting
User Manual PT-IP-HD26X 7.2 1U Rack Mounting This product also can be mounted in a standard 1U rack (up to 8 units can be installed horizontally). The mounting steps are as follows: Step 1: Stack two products on top of each other, then use included screws to fix two 1U rack panels on the products, as shown in the figure below:... -
Page 19: Encoder And Decoder Matching Settings
User Manual PT-IP-HD26X 8. Encoder and Decoder Matching Settings When multiple Encoders and Decoders are in the system without a Controller Box, it is necessary to match them well firstly. You can match all Encoders and Decoders in following two methods. - Page 20 User Manual PT-IP-HD26X CAT5E/6/6A/7 Switch DEC 1 ENC 1 DC 12V HDMI OUT AUDIO OUT RS-232 DC 12V HDMI IN AUDIO IN/OUT RS-232 ENC 2 DEC 2 DC 12V HDMI IN AUDIO IN/OUT RS-232 DC 12V HDMI OUT AUDIO OUT...
- Page 21 User Manual PT-IP-HD26X Step 3: Press and hold the (CH SELECT) UP button on the front panel of the Encoder/ Decoder for 5 seconds to check the IP address. (Please refer to Chapter 5 for details.) Step 4: Set the PC’s IP address to be in the same network segment with the Encoder/ Decoder, for instance, set the IP address to be 169.254.3.150 and Subnet mask to be...
- Page 22 User Manual PT-IP-HD26X The Web GUI function pages are shown as below: ■ Device Information Page The Status page provides basic information about the Encoder/Decoder, such as Firmware Version, IP Address, Subnet Mask, Gateway and MAC Address. ■ Video Configuration Page...
- Page 23 User Manual PT-IP-HD26X Encoder Video Configuration Encoder video configuration page includes Main Stream, ID Setting, Audio Selection and EDID Setting. Main Stream: You can configure Video Encoding Format, Audio Encoding Format and Bitrate. Video Encoding Format supports H.264 and H.265 (H.265 by default). Audio Encoding Format supports PCM and AAC (PCM by default).
- Page 24 User Manual PT-IP-HD26X User EDID 1 and User EDID 2 can be uploaded in Select User EDID1 File and Select User EDID2 File, and the content of the uploaded binary file is EDID. (This file can be downloaded from the Download EDID of the Decoder Video page.) Decoder Video Configuration...
- Page 25 User Manual PT-IP-HD26X Transmission Protocol: You can select “udp unicast” or “udp multicast” (udp multicast by default). Scaler Setting: You can set the output resolution (Pass Through by default). Download EDID: You can download the EDID binary file of the display device connected to the Decoder.
- Page 26 User Manual PT-IP-HD26X Notes: (1) The Network Settings can be set only when the Mode button is set to Static. (2) All changes will take effect by clicking “Save” below. (3) After any changes to the Network Settings, username or Login Password, it will redirect to the Web browser home page or the Web GUI login interface.
- Page 27 User Manual PT-IP-HD26X Decoder Update Page Click “Browse..” to import the Firmware or Boot Logo upgrade file and click “Update” to start upgrade. There will be a progress bar prompt during the upgrade process. When the progress bar reaches 100%, it indicates the upgrade is successful, and the device will be restarted automatically.
-
Page 28: Rtsp-Stream Instruction
User Manual PT-IP-HD26X 10. RTSP-Stream Instruction 10.1 Stream Format (a) The MainStream format is as following: rtsp://IP:PORT/live/main/av_stream IP is the IP address of the device, PORT is the access port of rtsp (the default port is 554, and it is not necessary to write when the port is 554). - Page 29 User Manual PT-IP-HD26X Step 2: Select the media type to play. Click “Media”, and select “Open Network Stream…”. Step 3: Enter a MainStream Network URL.
- Page 30 User Manual PT-IP-HD26X Step 4: Click “Play” to start playing the Stream.
-
Page 31: After-Sales Service
User Manual PT-IP-HD26X 11. After-Sales Service If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). - Page 32 User Manual PT-IP-HD26X...
-
Page 33: Asking For Assistance
User Manual PT-IP-HD26X Asking for Assistance Technical Support: Phone: +49 5971 800299 - 0 Fax: +49 5971 800299 – 99 Technical Support Hours: 8:30 AM to 5:00 PM Monday thru Thursday 8:30 AM to 4:00 PM Friday Write to: PureLink GmbH Von-Liebig-Straße 10...
Need help?
Do you have a question about the PT-IP-HD26X and is the answer not in the manual?
Questions and answers