Rotax 912 i Series Service Instruction page 8

SI-912 i-029 / SI-915 i-012
SI-916 i-007
1 EGT sensor cable
2 Double ignition coil cable
3 Cable tie
1 Double ignition coils
2 Exhaust Gas Temperature Sensor (EGT)
Step
08 February 2024
Initial Issue
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
4 Unplug the Exhaust Gas Temperature sensor (EGT). See current Maintenance Manual
Heavy (MMH), Chapter 76-50-00 Wiring harness - removal.
5 Press spring hook downwards and carefully pull the Exhaust Gas Temperature sen-
sors (cylinders 1 and 2) out of the connector bracket.
SERVICE INSTRUCTION
Fig. 3
Fig. 4
Procedure
74-20-00
Page 8 of 15