Table of Contents
Advertisement
4.10 Transposer
The Transposer function shifts the pitch by half-tone increments (from -8 to +8).
The transposer setting can be read on the display (Tr: ...).
1.
Press the TRANS piston.
2.
Use the - and + pistons to set the pitch.
3.
When the transposer change needs to be saved, press the ENTER piston in
the time the TRANS. piston is lit.
4.11 Johannus Menu
In the Johannus Menu several functions of the organ can be set.
Press the MENU piston to activate the Johannus Menu on the display.
Navigating the menu is done with the - and + pistons.
Confirmation of a choice is done with the ENTER piston.
Cancel or step back in the menu is done with the MENU piston.
The Johannus Menu consists of the following functions:
Function
4.11.1 Datadump
The Datadump function sends settings from the organ to a storage medium (a
sequencer, for example) through the MIDI SEQ output. See § 3.4.
1.
Press the MENU piston.
2.
Use the - and + pistons to select the
Datadump function on the display.
Press the ENTER piston. The Press
3.
ENTER text appears on the display.
4.
Make sure the desired storage medium is properly connected.
5.
Press the ENTER piston. When data is
being sent, Sending data... appears
on the display. Sending data will take
some time.
User Manual Studio 150
More info:
§ 4.11.1
§ 4.11.2
§ 4.11.3
§ 4.11.4
§ 4.11.5
§ 4.11.6
§ 4.11.7
§ 4.11.8
§ 4.11.9
§ 4.11.10
§ 4.11.11
§ 4.11.12
§ 4.11.13
Johannus Menu:
Datadump
Datadump
Press ENTER
Datadump
Sending data...
14
Hide quick links:
Advertisement
Table of Contents
