Table of Contents
Advertisement
3
SPECIFICATIONS
Specifications
Power supply
Rated load current
Compatible load types
Required limit switches
Recommended external
overcurrent protection
For installation in boxes
Recommended wires
Operating temperature
Ambient humidity
Radio protocol
Radio frequency band
Max. transmitting power
Range
Dimensions
(Height x Width x Depth)
Compliance with EU directives
Note:
Radio frequency of individual device must be same as your Z-Wave controller. check information on the box or consult your dealer if you are
not sure.
100-240V~ 50/60 Hz
2A for motors with compensated power factor (inductive loads)
single-phase AC motors
M
~
Electronic or mechanic
10A type B circuit breaker (EU)
13A type B circuit breaker (Sweden)
Ø
= 50mm, depth ≥ 60mm
Cross-section area between 0.75-1.5 mm2 stripped 8-9 mm of insulation
0–35°C
10–95% RH without condensation
Z-Wave (800 series chip)
EU: 868.4 MHz, 869.85 MHz
AH: 919.8 MHz, 921.4 MHz
+6dBm
up to 100m outdoors up to 30m indoors
(depending on terrain and building structure)
46 × 36 × 19.9 mm
RoHS 2011/65/EU
RED 2014/53/EU
Advertisement
Table of Contents
