Table of Contents
Advertisement
Monostable switches – hold to move
Example of the switch design:
Monostable switches - hold to move
Parameter:
20.
Value:
1
Parameter:
151. Roller blind, Awning, Pergola or Curtain
Description:
1×click
1×click
2×click
Hold
Hold
Available values:
0
Parameter:
151. Venetian blind
Description:
1×click
1×click
2×click
Hold
Hold
Available values:
1 or 2
Favorite position – available
If you hold down the switch longer than slats movement time + additional 4 seconds
(default 1,5s+4s =5,5s) the device will go limit position. In that case releasing the switch will do nothing.
Single monostable switch
Example of the switch design:
Single monostable switch
Parameter:
20.
Value:
3
Parameter:
151. Roller blind, Awning, Pergola or Curtain
Description:
1×click switch
One more click
2×click or switch - Favorite position
Hold
Available values:
0
Parameter:
151. Venetian
Description:
1×click switch
One more click
2×click or switch - Favorite position
Hold
Available values:
1 or 2
Favorite position – available
switch
- 10% up movement
switch
- 10% down movement
or
switch - Favorite position
- Up movement until release
- Down movement until release
switch
- Slats rotates up by the predefined step
switch
- Slats rotates down by the predefined step
or
switch - Favorite position
- Up movement until release
- Down movement until release
- Initiate movement to the limit position
Next click – stop
- Initiate movement to the opposite limit position
- Initiate movement until release
- Initiate movement to the limit position
Next click – stop
- Initiate movement to the opposite limit position
- Initiate movement until release
Advertisement
Table of Contents
