Table of Contents
Advertisement
12
CONFIGURATION
Association (linking devices) – direct control of other devices within the Z-Wave system network.
Associations allow:
•
Reporting the device status to the Z-Wave controller (using Lifeline Group),
•
Creating simple automations by controlling other 4th devices without participation of the main controller (using groups assigned to ac-
tions on the device).
Note.
Commands send to 2nd association group reflect button operation according to device configuration,
e.g. starting the blinds movement using button will send
frame responsible for the same action.
The device provides the association of 2 groups:
1st association group – "Lifeline" reports the device status and allows for assigning single device only (main controller by default).
2nd association group – "Window Covering" is intended for curtains or blinds allowing the user to control the amount of light
going through windows.
The device allows to control 5 regular or multichannel devices for 2nd association group, while "Lifeline" is reserved solely for the controller
and hence only 1 node can be assigned.
To add an association:
1.
Go to Settings
.
2.
Go to Devices.
3.
Select the relevant device from the list.
4.
Select the Associations tab.
5.
Specify to which group and which devices to associate.
6.
Save your changes.
Advertisement
Table of Contents
