Table of Contents
Advertisement
Three-state switch
Example of the switch design:
Bistabile switches
Parameter:
20.
Value:
5
Parameter:
151. Roller blind, Awning, Pergola or Curtain
Description:
1×click - Initiate movement to the limit position in the selected
Available values:
0
Parameter:
151. Venetian
Description:
1×click - Initiate movement to the limit position in the selected
Available values:
1 or 2
Favorite position – unavailable
Favorite position
Your device has a built-in mechanism for setting favorite positions.
You can activate it by double-clicking on the monostable switch(es) connected to the device or from the mobile interface (mobile app).
Favorite roller blind position
You can define the favorite position of the blinds. It can be se t in parameter 159. The default value is set to 50%.
Favorite slats position
You can define the favorite position of the slats angle. It can be set in parameter 160. The default value is set to 50%.
Pot protection
Your device has a built-in mechanism to protect, for example, flowers on the windowsill.
This is the so-called virtual limit s witch.
You can set its value in parameter 158.
The default value is 0 - this means that the roller blind will move between the maximum end positions.
LED indicators
The built-in LED shows the current status of the device. When the device is powered:
Color
Description
Green
Device added to Z-Wave network (non-secure, S0, S2 not Authenticated)
Magenta
Device added to Z-Wave network (Security S2 Authenticated)
Red
Device not added to the Z-Wave network
Blinking cyan
Update in progress
direction until the switch selects the stop command
direction until the switch selects the stop command
Advertisement
Table of Contents
