Description And Features - Nice Roll-Control2 Instructions And Warnings For Installation And Use

2

DESCRIPTION AND FEATURES

The NICE Roll-Control2 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas.
THE NICE Roll-Control2 allows precise positioning of roller blinds or venetian blind slats. The device is equipped with energy monitoring. It
allows to control connected devices either via the Z-Wave
Main features
• Can be used with:
- Roller blinds.
- Venetian blinds.
- Pergolas.
- Curtains.
- Awnings.
- Blind motors with electronic or mechanical limit switches.
• Active energy metering.
• Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
®
• Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of
®
the network).
• May be used with all devices certified with the Z-Wave Plus
manufacturers.
• Works with different types of switches; for comfort of use, it is recommended to use switches dedicated to the NICE Roll-Control2
operation (monostable, NICE Roll-Control2 switches).
Note:
The device is a security enabled Z-Wave Plus
product.
network or via a switch connected directly to it.
®
certificate and should be compatible with such devices produced by other
®
product and a security enabled Z-Wave
®
controller must be used in order to fully utilize the
®