Konftel 800 Installation & Administration page 90

SETTINGS CONFIGURATION AND MANAGEMENT
String
<SCEPENCALG>
<logging>
<remote_syslog_enable>
<remote_syslog_host>
Description
To specify the SCEP encryption algorithm. If the
value is 0, then SCEP operates using the DES
encryption. If the value is 1, then SCEP operates
using the AES-256 encryption. If you put any other
value than 0 or 1, or skip the parameter, then SCEP
also operates using the DES encryption.
Terminology reference
: Encryption Algorithm
Web interface
: Not configurable
Phone UI
The top line of the Logging section.
To enable the use of a remote syslog server. The
options are the following:
• True.
• False. This is the default setting.
Terminology reference
: Not configurable
Web interface
: Not configurable
Phone UI
To specify the IP address or FQDN of the syslog
server.
Terminology reference
: Not configurable
Web interface
: Not configurable
Phone UI
90
Table continued...