Registration With The Zti Device Management Service; Upgrading Multiple Devices - Konftel 800 Installation & Administration

FIRMWARE UPGRADE AND DOWNGRADE
Konftel Zero Touch Installation
Zero Touch Installation (ZTI) is an add-in for automatic provisioning that Konftel
800 supports. It provides for the remote configuration of the phone by using a data
file with settings. The phone downloads the file from a Device Management server.
The user can apply ZTI when centrally upgrading the phone software.
Related concepts
Certificates on page 142
Konftel 800 .xml configuration files

Registration with the ZTI device management service

About this task
Use this procedure to register the phone with the device management service and
receive the provisioning settings.
Before you begin
Connect the phone to the data network and start it.
Procedure
In the web browser, enter https://www.konftel.com/zti-access.
Register the phone with Konftel ZTI by entering its MAC address and serial
number.
The device management service provides the phone with the address of the
provisioning server where the user can download the configuration file in .xml
format.
Confirm your choice.
The phone restarts and goes to the appropriate server to download the
configuration file.

Upgrading multiple devices

About this task
You can upgrade firmware on multiple Konftel 800 devices using Device
Management instead of upgrading each phone individually. For this purpose,
Device Management must be enabled for the devices, the provisioning server
must be specified for the devices, and the firmware binary file and the firmware
metadata file must be available on the provisioning server.
Note that you must have separate kt800-<MAC>.xml configuration files for each
Konftel 800. Here, <MAC> is the MAC address of a specific phone.
on page 24
138