Logging Out From Konftel 800; Administration By Using The Phone's Touch Screen - Konftel 800 Installation & Administration

INITIAL SETUP AND CONFIGURATION

Logging out from Konftel 800

About this task
Use this procedure to log out from the web server of your Konftel 800 from your
web browser.
Before you begin
You must be logged in to the web interface of your conference phone.
Procedure
On the web browser, click
You are forwarded to the
in.

Administration by using the phone's touch screen

Konftel 800 allows for configuration by using its touch screen once the user logs
in with the administration password. When you modify a parameter, the device
verifies its syntax and then automatically saves it to the non-volatile memory. After
you exit the menu levels to the idle screen, the conference phone restarts or
reboots as required to apply the configuration.
The Settings menu that you can access from your Konftel 800 is as follows:
Settings
Status
Phone
Name, Language, Security, Admin Password, Ring Level, Key Tone, Call Log,
Ceiling Audio Mode, Daisy Chain, Startup Sound, Factory Reset, Reboot,
Media
SRTP, SRTCP, Codec, Capability Negotiation, Voice Quality Monitor
Advanced
First Media Port, Last Media Port
SIP
Primary Account, Secondary Account, Fallback Account, Port, Transport
Protocol, TLS, SNI, DTMF, NAT Traversal
Advanced
Disable 'rport', Session Timers, Session Expiration, Outbound Proxy, Allow
Contact Rewrite, Allow Via Rewrite, Enable SIP Replaces, Use Static Source
Port
Network
DHCP, Hostname, Domain, Static IP, DNS1, DNS2, VLAN, VLAN ID
.
Logout
page and see the prompt that you are not logged
Login
32