Konftel 800 Installation & Administration page 137

FIRMWARE UPGRADE AND DOWNGRADE
• Firmware file (filename ends in .kt)
• Firmware metadata file (as provided in the Konftel Firmware bundle)
• Global configuration file
• Device-specific configuration file (optional)
• Global certificate configuration file
• Device-specific certificate configuration file (optional)
Configuration priorities
The following table describes the priorities for files downloaded to the phone
during the Device Management configuration upgrade:
File type
Global configuration
file
Device-specific
configuration file
Global certificate
configuration file
Device-specific
certificate
configuration file
After Konftel 800 obtains the configuration from the provisioning server, parses
it, adds and saves the parameters in a local configuration file, all changes you
make using the web interface or the phone UI replace the parameters stored
as the current running configuration. To clear a manually set parameter, the
administrator must first provide a configuration file with the parameter having
no value assigned to it, and then push a configuration that contains the new
parameter.
Description
If available, the device obtains the global configuration
file kt800.xml and parses it. During the Device
Management update all parameters from the file are
loaded into the Konftel 800 running configuration.
If the device-specific configuration file kt800-
<MAC>.xml is available on the provisioning server, the
phone downloads and parses it. The parameters from
this file overwrite the parameters set by the global
configuration file.
If available, the device obtains the global certificate
configuration file and uses it for its operations.
The certificates the phone downloads from the
provisioning server overwrite any certificates you
downloaded manually using the phone web interface.
The device-specific certificate configuration file has
priority over the global certificate configuration file. All
its parameters overwrite the parameters loaded by the
global certificate configuration file.
137