Konftel 800 Installation & Administration page 26

INITIAL SETUP AND CONFIGURATION
When you open a default Konftel 800 configuration file, the second line, <KT800
version="6">, indicates the firmware version. This number automatically
increases when the Konftel 800 firmware version is upgraded.
Do not modify the version number.
In the configuration file, the "-" icons indicate the beginning of a branch. When
you click this icon, the branch collapses. Clicking the "-" icon does not delete the
branch. To expand the branch back to the original view, click the "+" icon.
The name of the example configuration file is kt800_default_config.xml. To
deploy this configuration file through a centralized management server, change
the file name to kt800.xml or kt800-<MAC>.xml. If you upload the file through
the web interface, you can use any file name.
You can modify the .xml file to configure the parameters of your Konftel 800. Here,
add specific data to the file section. In the example you can see the expanded SIP
Primary account section with the parameters set:
26