Usb Only User Mode; Time Presentation In Usb Only User Mode - Konftel 800 Installation & Administration

BLUETOOTH AND USB CONNECTION

USB ONLY USER MODE

Konftel 800 supports USB only user mode. With this feature, the conference
phone can operate with no SIP account and SIP register configured. In USB only
user mode Konftel 800 acts as a speakerphone that the user can use to conduct
virtual meetings and listen to audio files.
USB and Bluetooth® connection
In USB only user mode, the phone operates as a USB device connected to a USB
host.
In this mode, the phone supports connection to Bluetooth
Bluetooth ® Classic.
The administrator can use the configuration file to disable Bluetooth
The
Bluetooth
phone shows the following message: Bluetooth is disabled by the
administrator.
When idle, Konftel 800 does not display
USB only user mode. The user can see the phone name and the connection
option as follows:
• When the user connects the phone using USB, Konftel 800 indicates USB
audio on the home screen.
• When the user uses Bluetooth
Bluetooth® audio on the home screen.
• When the user uses both Bluetooth
indicates Bluetooth® audio on the home screen.
Related concepts
Provision of the NTP server address
Firmware upgrade and downgrade

Time presentation in USB only user mode

When the phone has NTP server settings enabled but it cannot connect to the
NTP server in USB only user mode, Konftel 800 does not display time on the
home screen and in the settings menu.
When the phone has NTP server settings disabled, the user can set the time
manually. Then the options of the time presentation are the following:
• On the home screen when there is no active Bluetooth
• On the status bar when the user connects to Konftel 800 using Bluetooth
USB.
button becomes inactive, and if the user taps it, the
® to connect the phone, Konftel 800 indicates
on page 129
Account Name
® and USB for connection, Konftel 800
on page 102
125
® devices using
®
.
on the home screen in
® or USB connection.
® or