Safety Guidelines - Konftel 800 Installation & Administration

OVERVIEW

SAFETY GUIDELINES

Ensure that you are familiar with the following safety guidelines before using,
installing, configuring, and administering Konftel 800.
• Read, understand, and follow all the instructions.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards.
• Ensure that the power cord or plug is not damaged.
• Do not overload wall outlets and extension cords as this can result in the risk of
fire or electric shock.
• Avoid wetting the device to prevent fire or electrical shock hazard.
• Unplug the device from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners, harsh chemicals, cleaning solvents, or strong detergents to
clean the device. Use a damp cloth for cleaning.
• Avoid exposing the device to high temperatures above 40°C (104°F), low
temperatures below 0°C (32°F), or high humidity.
• Do not block or cover slots and openings of the device. These openings are
provided for ventilation, to protect the phone from overheating.
• Never push objects of any kind into this device through cabinet slots as they
might touch dangerous voltage points or short out parts that could result in a
risk of fire or electric shock.
• Do not disassemble this product to reduce the risk of electric shock. Opening
or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock during subsequent use.
• Do not use the device to report a gas leak in the vicinity of the leak.
• Do not use the device near intensive care medical equipment or close to
persons with pacemakers.
• Do not place the device too close to electrical equipment such as answering
machines, TV sets, radios, computers, and microwave ovens to avoid
interference.
In case Konftel 800 and the corresponding accessories are damaged, the
device does not operate normally or exhibits a distinct change in performance,
refer for servicing to the qualified service personnel.
19