Konftel 800 Installation & Administration page 76

SETTINGS CONFIGURATION AND MANAGEMENT
String
<vlan>
<vlanid>
<ieee_8021x>
<enable>
Description
To enable the VLAN tagging of the Ethernet
packets. The options are the following:
• True.
• False. This is the default setting.
Terminology reference
: VLAN Enable
Web interface
: VLAN
Phone UI
To specify the VLAN ID for the phone to use when
tagging Ethernet packets. The device accepts only
ingress packets tagged with the configured VLAN.
The options are the following: from 0 to 4094.
With LLDP enabled, the L2/3 switch may
broadcast a Network Policy LLDP packet
that sets the VLAN ID for the phone. The
LLDP broadcast packet overrides the manually
configured VLAN value.
Terminology reference
: VLAN ID
Web interface
: VLAN ID
Phone UI
The top line of the 802.1x section.
To enable 802.1x that is a network security and
authentication mechanism aimed to ensure that
only authorized IP devices obtain access to the
network.
The options are the following:
• True.
• False. This is the default setting.
Terminology reference
: Enable 802.1X
Web interface
: 802.1x
Phone UI
76
Table continued...