Connecting To A Network With Dhcp - Konftel 800 Installation & Administration

INITIAL SETUP AND CONFIGURATION
• L2QVLAN
DHCP Site Specific Option Number parameters
The following table describes the parameters that DHCP SSON contains:
Parameter
HTTPSRVR
TLSSRVR
HTTPDIR
L2QVLAN
The following is an example of the syntax of
the DHCP SSON Option as provided within a DHCP
Offer: L2QVLAN=114,HTTPSRVR=111.222.232.234,HTTPDIR=KT800,
DES_STAT=0.

Connecting to a network with DHCP

About this task
Use this procedure to connect to a network with DHCP from your phone or
through the web interface.
Procedure
• To connect to the network with DHCP from Konftel 800, do the following:
Log in as the administrator.
Description
The IP Address or FQDN of an HTTP file server, which
the device uses to obtain configuration, firmware, or
certificates.
The IP Address or FQDN of a file server, which
the device uses to obtain configuration, firmware, or
certificates using the Transport Layer Security (TLS)
protocol as the security protocol.
The path name to prepend to all file names that the
device uses in HTTP and HTTPS GET operations during
its start-up. The path is relative to the root of the TLS or
HTTP file server.
The path length is from 0 to 127 ASCII characters without
spaces.
The VLAN ID of the voice Virtual Local Area Network
(VLAN). The default value is 0 which means "untagged".
23