Daylight Saving Time State - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
In the
Start Day Mode
In the
Start Day
The value range depends on the selected
you select
Day of month
The value range for the weekday is from 0 to 7. Note that in this case,
mean Sunday.
When
Start Day Mode
other values, the day is a day of the week: 1 is Monday, 5 is Friday. If
is 2 and
Day Mode
The values -1 to -5 show a weekday in the month from the month end. If
is -1 and
Day Mode
In the
Start Hour
In the
Stop Month
In the
Stop Day Mode
offset.
In the
Stop Day
The value range depends on the selected
you select
Day of month
In the
Stop Hour
Click .
Save
Related information
Configuration parameters

Daylight Saving Time state

Check the Daylight Saving Time state on the status page. The following options
are available:
• shows that the DST is active. This happens when you configure a UTC
On
timezone, enable
day and DST stop day. In this case, you can add the offset to the current time.
• demonstrates that the DST is not active. This happens when you configure
Off
a UTC timezone with the
between the DST start day and DST stop day. In this case, you cannot add the
offset to the current time.
• means that there is a Geo timezone set, and the phone ignores
Auto
the
Custom DST
automatically.
field, select the day mode to apply the DST offset.
field, specify the day to apply the DST offset.
as the day mode, the value range is from 1 to 31.
is 0, the start day is a day of the month. In case of
is 5, you define the second Friday in the month.
Start Day
is 5, this is the last Friday in the month.
Start Day
field, specify the hour to apply the DST offset.
field, select the month to stop applying the DST offset.
field, select the day mode to stop applying the DST
field, specify the day to stop applying the DST offset.
as the day mode, the value range is from 1 to 31.
field, specify the hour to stop applying the DST offset.
on page 35
, and the current date is between the DST start
Custom DST
Custom DST
settings. In this case, the DST settings are managed
Start Day Mode
Stop Day Mode
disabled, or the current date is not
101
. For example, if
and
0
Start
Start
. For example, if
7