Hostname To Ip Address Mapping; Messaging The Proxy Without Adding A Record Route - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
Optional: Disable
When you change the Use Static Source Port value though the web interface
or on the phone, the value in the configuration file changes accordingly.
Related information
Configuration parameters

Hostname to IP address mapping

Konftel 800 supports hostname to IP address mapping to resolve configured IP
address from hostnames. In case you do not have a DNS server configured, you
can manually map a hostname to the IP address using the configuration file.
You can configure host entities for the following services:
• NTP server
• RTCP XR Collector URI
• LDAP server
• SIP Registrar
• SIP Proxy
• STUN server
• TURN server
• Konftel ZTI server
• Provisioning server
• SCEP server
• Syslog server
If you use a Fully Qualified Domain Name (FQDN) in the SIP Registrar field
for the Primary, Secondary or Fallback SIP account, the SIP URI contains the
configured FQDN instead of the IP address of the SIP Registrar.
If you plan to use a fictional SIP Registrar hostname, you must add it to the
SIP server for its subsequent identification in SIP URI. SIP server checks if
the received hostname from SIP URI matches the hostname configured on the
server. If the hostnames do not match, the SIP server rejects the configuration
with the following error code: code 403, Forbidden.

Messaging the proxy without adding a record route

About this task
In the SIP peer communication, Konftel 800 adds a record route to registration
or any other message to the proxy. This appending indicates another device
in the SIP path. If you want your conference phone not to send this message
Use Static Source Port
on page 35
112
.