Table of Contents
Advertisement
Spark plug dismantlement (04_10, 04_11)
This engine has two spark plugs.
Remove the door located in the right side panel, unscrewing the screw A, and using
a small screwdriver in the rear hollow. Then proceed as follows:
1. Disconnect the caps «B» of the HV cables of the spark plugs;
2. Undo the spark plugs with the specific spark plug spanner.
3. When reassembling, place the spark plugs in their hole with the correct inclination
and screw it in completely by hand;
04_10
4. Use a wrench only to secure it;
5. Insert the caps «B» on the spark plugs all the way to the bottom;
6. Reattach the door, paying attention to the insertion of the rear hook.
CAUTION
THE SPARK PLUGS MUST BE DISMANTLED WHEN THE ENGINE IS COLD.
SPARK PLUG MAINTENANCE IS DESCRIBED IN THE SCHEDULED MAINTE-
04_11
NANCE TABLE. THE USE OF NON-CONFORMING ELECTRONIC CONTROL
UNITS AND ELECTRONIC IGNITIONS AND SPARK PLUGS OTHER THAN
THOSE RECOMMENDED MAY SERIOUSLY DAMAGE THE ENGINE.
.
N.B.
USING SPARK PLUGS OTHER THAN THE INDICATED TYPE OR SHIELD-LESS
SPARK PLUG CAPS CAN CAUSE ELECTRICAL SYSTEM FAILURES.
130
Advertisement
Table of Contents
