PIAGGIO MP3 530 hpe Manual page 69

ASR SYSTEM STATUS
ASR programming phase
(successful)
ASR programming phase (failed)
ASR INDICATOR LIGHT
WITH THE ENGINE
SWITCHED OFF OR THE
KEY TO "ON"
-
-
ASR SYSTEM CALIBRATION PROCEDURE
To keep the efficiency of the ASR system after replacing one or both tires, the
calibration of the system must be performed according to the following methods:
• Wait until the diagnostic phase of the ASR and ABS systems is complete;
02_103
• Start the engine and drive a short straight stretch of flat road above 5 km / h
(3.1 mph) and wait for the flashing of the two ABS and ASR indicator lights to switch
off;
• Stop and allow the engine to run in idle for at least 5 seconds;
02_104
ASR INDICATOR LIGHT
WITH THE ENGINE
SWITCHED ON AND THE
VEHICLE RUNNING
"ASR" icon: 1 Hz slow flashing; at
the next engine start, the icon is off
if the programming failed.
"ASR" icon: switched on steady at
the next engine start if the
programming has failed.
69
ASR RUNNING WHILE
DRIVING (LOW GRIP
CONDITIONS)
-
-