Spark Plug Dismantlement - PIAGGIO LUM Beverly Sport Touring 350 ie Manual

Table of Contents

Advertisement

TYRES
Front tyre
Rear tyre
TYRE INFLATION PRESSURE
Front tyre pressure (with
passenger)
Rear tyre pressure (with
passenger)
110/70 - 16'' M/C 52S Tubeless
150/70 - 14" M/C 66S Tubeless
2.2 bar (2.2 bar)
2.4 bar (2.6 bar)

Spark plug dismantlement (03_11, 03_12)

Proceed as follows:
- Remove the case that grants access to the spark plug located on the right side fairing
by unscrewing the indicated screw.
- Disconnect spark plug HV wire cap «A».
- Unscrew the spark plug using the wrench supplied.
- When refitting, place the spark plug into the hole at the corresponding angle and
finger tighten it as far as it will go. Use the wrench only to tighten it.
03_11
- Place cap «A» fully over the spark plug.
46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents