Table of Contents
Advertisement
To use the reverse gear:
1. Keep the vehicle at a standstill with the engine at idle speed;
2. Move the Drive/Reverse selector to position "R";
N.B.
WITH THE VEHICLE RUNNING, BY ACCIDENTALLY SELECTING THE REVERSE
MODE WITH THE "R" SELECTOR, THE ACTUAL ENGAGEMENT OF THE RE-
VERSE GEAR WILL BE PERFORMED WHEN THE VEHICLE IS AT A STAND-
STILL.
03_19
3. Reverse gear enable is confirmed by the rear view camera being switched on.
03_20
The images captured by the camera will be directly visible on the digital display.
CAUTION
FOR PROPER OPERATION, THE CAMERA MUST ALWAYS BE CLEAN OF MUD,
DIRT, SNOW OR ICE. WHEN CLEANING THE CAMERA, BE VERY CAREFUL NOT
TO SCRATCH OR DAMAGE THE CAMERA; AVOID USING DRY, ROUGH OR
HARD CLOTHS. THE CAMERA SHOULD BE WASHED WITH CLEAN WATER, IF
03_21
POSSIBLE BY ADDING CAR SHAMPOO. AVOID USING HIGH PRESSURE OR
105
Advertisement
Table of Contents
