Table of Contents
Advertisement
PASSIVE RECOGNITION OF THE REMOTE CONTROL
If the remote control battery is completely discharged or if there are external radio
interferences, the remote control will not be recognised.
The system is equipped with passive recognition used to start the vehicle; proceed as
follows:
•
Place the remote control in the remote control compartment under the saddle
on the left side of the vehicle, near the "Keyless" system control unit;
02_130
N.B.
PASSIVE RECOGNITION FOR STARTING THE VEHICLE IS ALSO POSSIBLE
USING THE MECHANICAL MASTER KEY, WHICH IS ALSO LOCATED IN THE
APPROPRIATE COMPARTMENT UNDER THE SADDLE, ON THE LEFT-HAND
SIDE.
02_131
•
with the remote control in position (or, if necessary with the mechanical MAS-
TER key), press and release the starter switch to activate the communication
between the control unit and the remote control;
02_132
82
Advertisement
Table of Contents
