Sensor Cap Replacement Timer Setting - Optex DOS-20 Instruction Manual

◆ Sensor cap replacement timer setting

Perform the following steps to shorten the sensor cap replacement timer
according to the measurement target.
Press
1
The measurement item selection display is displayed.
Select [DO DOS-20] using
2
Sensor cap replacement timer setting
must be set for each sensor. The set-
ting is not availble if [All] is selected.
The maintenance menu is displayed.
Select [Sens. Cap Replacement]
3
using
The number of days remaining in the
set sensor cap replacement timer is
displayed to the right of the timer.
44
.
, and press
, and press
.
Sensor channel
.
Sensor model
Measurement item