Cleaning Activation; Post-Cleaning Standby - Optex DOS-20 Instruction Manual

Cleaning activation

Set the time period for cleaning.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "9 Cleaning" and " ◆ Cleaning Activation".
Item
Cleaning Activation

Post-cleaning standby

Set the standby time after cleaning.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "9 Cleaning" and " ◆ Post-cleaning Standby".
Item
Post-cleaning Standby 10 to 180 seconds (by 10 seconds)
48
Setting range
10 to 120 seconds (by 10 seconds)
Setting range
Factory
default setting
30 seconds
Factory
default setting
30 seconds